Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1
    Senior Tech 250+ Posts
    Join Date
    Jun 2018
    Location
    Newton Ground
    Posts
    295
    Rep Power
    15

    Knick on the fuder sleeve

    Good day all. Hope everyone is safe and well.
    I've got this knick on the fuser sleeve. Pretty small but it shows up on he print in the most strange areas. Well most prints especially when we're doing booklets. Is there anyway to change the roller or sleeve on this KM C454e?
    Please let me know this fiser has less than 50k clicks
    Thanks again

    Sent from my SM-G955F using Tapatalk

  2. #2
    Senior Tech 100+ Posts
    Join Date
    Feb 2015
    Posts
    212
    Rep Power
    22

    Re: Knick on the fuder sleeve

    I have replaced rollers on kyocera machines, since they are available. but on c454 you may have to get a whole fuser unit. Unless you know how to get them apart and rebuild them.....

    Sent from my motorola one 5G UW using Tapatalk

  3. #3
    Service Manager 5,000+ Posts
    Knick on the fuder sleeve

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    7,531
    Rep Power
    182

    Re: Knick on the fuder sleeve

    Quote Originally Posted by positiveg View Post
    Good day all. Hope everyone is safe and well.
    I've got this knick on the fuser sleeve. Pretty small but it shows up on he print in the most strange areas. Well most prints especially when we're doing booklets. Is there anyway to change the roller or sleeve on this KM C454e?
    Please let me know this fiser has less than 50k clicks
    Thanks again

    Sent from my SM-G955F using Tapatalk
    I have a new c454e fuser for sale should you need one.
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  4. #4
    Service Manager 2,500+ Posts
    Knick on the fuder sleeve


    Join Date
    Sep 2005
    Location
    South Jersey
    Posts
    3,837
    Rep Power
    133

    Re: Knick on the fuder sleeve

    Quote Originally Posted by positiveg View Post
    Good day all. Hope everyone is safe and well.
    I've got this knick on the fuser sleeve. Pretty small but it shows up on he print in the most strange areas. Well most prints especially when we're doing booklets. Is there anyway to change the roller or sleeve on this KM C454e?
    Please let me know this fiser has less than 50k clicks
    Thanks again

    Sent from my SM-G955F using Tapatalk
    They sell aftermarket fuser sleeves & rollers. The sleeve is same as C224 & 4 series. The C454 & C454e uses a different lower roller but sleeve is same. Sleeve cost around $50. Takes a few hours to rebuild the fuser first time doing it.

    This was discussed a lot here: Bizhub C224e/C258 series fuser premature failure

  5. #5
    SanDiegoCopierRepair.com 1,000+ Posts
    Knick on the fuder sleeve

    blazebusiness's Avatar
    Join Date
    Apr 2010
    Location
    From NY--- live in San Diego , Ca.
    Posts
    1,248
    Rep Power
    51

    Re: Knick on the fuder sleeve

    Quote Originally Posted by positiveg View Post
    Good day all. Hope everyone is safe and well.
    I've got this knick on the fuser sleeve. Pretty small but it shows up on he print in the most strange areas. Well most prints especially when we're doing booklets. Is there anyway to change the roller or sleeve on this KM C454e?
    Please let me know this fiser has less than 50k clicks
    Thanks again

    Sent from my SM-G955F using Tapatalk
    I prefer to just replace the whole fuser and avoid the risk of something going wrong rebuilding these. But 50K is a very low click count on that fuser so , if money is an issue, they do sell aftermarket sleeves. Not sure if you can get them or who you use for parts on your island.
    Anything can be made to work if you fiddle with it long enough- San Diego Copier Repair.com

  6. #6
    Service Manager 1,000+ Posts
    Join Date
    Mar 2017
    Posts
    1,568
    Rep Power
    73

    Re: Knick on the fuder sleeve

    I just coudn't wait to see what Knick on the fuder sleeve was all about. lol

  7. #7
    SanDiegoCopierRepair.com 1,000+ Posts
    Knick on the fuder sleeve

    blazebusiness's Avatar
    Join Date
    Apr 2010
    Location
    From NY--- live in San Diego , Ca.
    Posts
    1,248
    Rep Power
    51

    Re: Knick on the fuder sleeve

    Quote Originally Posted by emujo2 View Post
    I just coudn't wait to see what Knick on the fuder sleeve was all about. lol
    Yes, at first I was concerned he was referring to a body part. Sounded extremely painful.
    Last edited by blazebusiness; 02-16-2021 at 03:49 PM.
    Anything can be made to work if you fiddle with it long enough- San Diego Copier Repair.com

  8. #8
    Service Manager 1,000+ Posts Bix's Avatar
    Join Date
    Apr 2018
    Location
    Berlin
    Posts
    1,421
    Rep Power
    39

    Re: Knick on the fuder sleeve

    Hey, make sure the filter is clean. Alternatively, replace the toner filter
    In some cases, they may cause toner to build up and damage consumables.
    (accumulation of toner)

  9. #9
    Senior Tech 100+ Posts
    Join Date
    Feb 2015
    Posts
    212
    Rep Power
    22

    Re: Knick on the fuder sleeve

    I would get another fuser while you rebuild this one. Depending on how long it takes to get the parts...

    Sent from my motorola one 5G UW using Tapatalk

  10. #10
    Copier Technician 1,000+ Posts
    Knick on the fuder sleeve

    mga's Avatar
    Join Date
    Dec 2010
    Location
    london
    Posts
    1,393
    Rep Power
    135

    Re: Knick on the fuder sleeve

    Quote Originally Posted by positiveg View Post
    Good day all. Hope everyone is safe and well.
    I've got this knick on the fuser sleeve. Pretty small but it shows up on he print in the most strange areas. Well most prints especially when we're doing booklets. Is there anyway to change the roller or sleeve on this KM C454e?
    Please let me know this fiser has less than 50k clicks
    Thanks again

    Sent from my SM-G955F using Tapatalk
    That looks like a compatible part try to only use oem the cheap China parts are rubbish
    Regards Mark

    FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.

    RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.

    https://copierservices.simdif.com

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here