Hello there,
By default, the printer does the following problem:
1-page-001.jpg
If i swap the Cyan drum for Magenta drum:
2-page-001.jpg
i don't understand the logic, could anyone explain?
Yours sincerely, Lakatom
Hello there,
By default, the printer does the following problem:
1-page-001.jpg
If i swap the Cyan drum for Magenta drum:
2-page-001.jpg
i don't understand the logic, could anyone explain?
Yours sincerely, Lakatom
How are the Level Histroy values for cyan and yellow?
If ok new blades for cyan and yellow else new drums.
What are the drum counts? Are they near or past yield?
As mentioned before , it's a drum issue .
For yellow it seems only a drum blade issue
Cyan seems a drum issue. If you want u can try adjusting the background level or adjust the primary transfer voltage. it might give you more time before u change it
Sent from my SM-G610F using Tapatalk
I beg to differ, the cyan dv is shot. Look at the diagonal voids on cyan blocks.
Maybe a yellow drum issue too but the cyan dv unit definitely needs to be replaced.
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
Print halftone test patterns from service mode at some diferent densities. That would expose faulty parts.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
level hirtory.jpg
Cyan got a new blade for a month, but the corona unit have a "foil", its cr*p, i don't know if that could be a problem.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
Bookmarks