Dislikes: 0
According to ur photos , since the cyan drum is on magenta now , then its a drum issue (the drum itself).
The yellow lines if not visible on the yellow prints as white lines then its a blade issue.
As i stated before u might play around the magenta drum . Better swap it on yellow and if issue is still visible on prints adjust the background and primary voltage.
Sent from my SM-G610F using Tapatalk
Always print the cmyk gradation test pages. All 4.
So much more revealing of issues.
1 black pattern unfortunately does not help with a color problem.
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
Try this set of originals:
=^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
And table number?Originally Posted by Lakatom
Thanks: 
Likes: 
Reply With Quote
Bookmarks