Hello,
Like on scan we have on every paper a horizontal line. I cleaned the drums without success. Some weeks ago fuser unit had been replaced after some sensor error messages. What could be the problem?
- on every paper
- on all colors
scan.pdf
Hello,
Like on scan we have on every paper a horizontal line. I cleaned the drums without success. Some weeks ago fuser unit had been replaced after some sensor error messages. What could be the problem?
- on every paper
- on all colors
scan.pdf
Last edited by SvenSchoen; 02-23-2021 at 12:52 PM. Reason: typo
End of life of the transfer belt is 10/07/2019 so I will change that one.
scan or print?
makes a difference.
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
both
so if you scan to PC the stripe is there?
it kinda looks like fuzz on the laser slit glass.
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
Replaced the transfer belt seems to be OK now. Drums seems to be fine.
3.jpg
Now I will search on the forum how to reset the counter.
Bookmarks