Results 1 to 3 of 3
  1. #1
    Service Manager 2,500+ Posts
    BH-C-25, Calibrating after wake up

    Hansoon's Avatar
    Join Date
    Sep 2007
    Posts
    2,693
    Rep Power
    76

    BH-C-25, Calibrating after wake up

    This BH-C-25 starts a long calibration cycle every time it starts up after sleep mode. Any idea please how to stop this? Is this a firmware issue?

    Hans
    " Sent from my Intel i286 using MS-DOS 2.0 "

  2. #2
    Senior Tech 100+ Posts
    Join Date
    May 2011
    Location
    UK
    Posts
    211
    Rep Power
    24

    Re: BH-C-25, Calibrating after wake up

    Whats the life count?
    Have you changed anything?

    My first bet would be replace either the transfer belt or K iu, they tend to be the items that I have replaced in the past to fix this issue.

  3. #3
    Service Manager 2,500+ Posts
    BH-C-25, Calibrating after wake up

    Hansoon's Avatar
    Join Date
    Sep 2007
    Posts
    2,693
    Rep Power
    76

    Re: BH-C-25, Calibrating after wake up

    Quote Originally Posted by Gaffers01 View Post
    Whats the life count?
    Have you changed anything?

    My first bet would be replace either the transfer belt or K iu, they tend to be the items that I have replaced in the past to fix this issue.
    Only K7K, C0.5K so in total 7.5K only. But I just discovered that exactly in the middle of the TB is a brownish line of toner residue in the feeding direction. Just where the IDC sensor sits. Will look after this first.

    Thanks

    Hans
    " Sent from my Intel i286 using MS-DOS 2.0 "

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here