Hi. How can I test that the tonner supply is working?
Hi. How can I test that the tonner supply is working?
Go in service mode and check TCR levels. Then do toner add in service mode and recheck TCR settings. Should be higher normally.
Out of interest what problem/trouble you have?
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
Hi, thanks for interest. The problem was flaws in the yellow. I changed the developer because it was above the count, for some time it worked but the problem came back in the same way.
SKM_C25821030609061.jpg
Ok so your yellow dev is too low again. By changing dev you mean only replace the dev powder? Or did you change the dev tank? So in this case i will change out the Dev tank with a new one but very important would be to replace the drum unit as well. Clean out the machine properly make sure the air ducts and filters are clear. Clean out the entire cavity by removing all the drums, devtank and the ITB.
You can always move the drum to C or M.
Whatever
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Do i understand you correctly here. You pinched the tube and no tonner was getting to the dev tank? Ok so you are using 3de party developer. Does it come with a TCR chip? How has the 3de party stuff been working for you. Please post a pic of the packaging and the brand name.
Whatever
Bookmarks