Page 4 of 4 FirstFirst 1234
Results 31 to 35 of 35
  1. #31
    Senior Tech 100+ Posts
    C-224e: MFP Controller Download N.G.


    Join Date
    Nov 2020
    Location
    Bayern
    Posts
    191
    Rep Power
    6

    Re: C-224e: MFP Controller Download N.G.

    Bad BlockCount.

  2. #32
    Senior Tech 100+ Posts
    C-224e: MFP Controller Download N.G.


    Join Date
    Nov 2020
    Location
    Bayern
    Posts
    191
    Rep Power
    6

    Re: C-224e: MFP Controller Download N.G.

    Quote Originally Posted by Synthohol View Post
    Ive see that happen after using the reset tool and not inputting the machine and type back in.
    Make sure it's not set to ff for both.
    I didn't use a SSD reset tool, ever. I didn't have one, because I didn't need. It's the original SSD Board with original counter and number. Is SSD reset for using a used SSD Board with original MFP Board necessary?
    Last edited by CP-1015; 03-13-2021 at 08:14 AM.

  3. #33
    Senior Tech 100+ Posts
    C-224e: MFP Controller Download N.G.


    Join Date
    Nov 2020
    Location
    Bayern
    Posts
    191
    Rep Power
    6

    Re: C-224e: MFP Controller Download N.G.

    One of customers employees cleaned with vacuum cleaner developer. After mounting new developer and two new drums with new blades, only those units were resetted. Customer don't want complete new units, because it's cheaper and more environmentally friendly to change only defect parts.
    After mounting a used FK-511 issue occurs during updating firmware. SSD updating form V6.01 to V6.03 proved defect SSD board.
    There is no way for criminalization.

  4. #34
    KONICA MINOLTA 50+ Posts Walterj's Avatar
    Join Date
    Jun 2017
    Location
    Lima
    Posts
    87
    Rep Power
    12

    Post Re: C-224e: MFP Controller Download N.G.

    Quote Originally Posted by CP-1015 View Post
    Stick: 2GB
    Firmware: G20-M1 and GDP-M1
    Tested with new stick, withaout ADF, FK-511 and HDD.
    No chance toget in service mode.
    Last possibility change with used MFP included SSD?
    Thanks advanced!

    I recommend that you perform the physical and logical formatting of the SSD, you do that by deactivating the HDD first.
    Then when you go to rewrite the FW select the Machine and Type well.
    First I select Boot Rom and you give it Start, then you just update all the boards.

  5. #35
    Junior Member
    Join Date
    Jun 2022
    Location
    jakarta
    Posts
    3
    Rep Power
    0

    Post Re: C-224e: MFP Controller Download N.G.

    Quote Originally Posted by CP-1015 View Post
    Stick: 2GB
    Firmware: G20-M1 and GDP-M1
    Tested with new stick, withaout ADF, FK-511 and HDD.
    No chance toget in service mode.
    Last possibility change with used MFP included SSD?
    Thanks advanced!
    Hi
    maybe you can follow this guide on the youtube
    Fixing Firmware N.G Message| Konica - YouTube

    reconnect the SSD / TPM Board on the MFP Board and try to install the firmware again

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here