Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: C658 finisher

  1. #1
    Senior Tech 100+ Posts
    Join Date
    May 2018
    Location
    Hong Kong
    Posts
    179
    Rep Power
    9

    C658 finisher

    hello,

    could anyone kindly provide the latest firmware of c658?
    one machine often shows c1105 on idle status, i reset the code and display again 1~2days later.
    after i reset, check the operation of finisher and act normal.

  2. #2
    Field Supervisor 500+ Posts
    Join Date
    Mar 2017
    Posts
    947
    Rep Power
    44

    Re: C658 finisher

    C-1105 is a exit drive problem, not one that can be corrected with firmware. E

  3. #3
    Senior Tech 100+ Posts
    Join Date
    May 2018
    Location
    Hong Kong
    Posts
    179
    Rep Power
    9

    Re: C658 finisher

    I visited the customer this day.
    They said the trouble code displayed after the paper has been ejected on main tray, after reset the code the machine can be worked normally.
    This issue already happened these few days.

    P.S. the F/W is G00-21

  4. #4
    Senior Tech 100+ Posts
    Join Date
    May 2018
    Location
    Hong Kong
    Posts
    179
    Rep Power
    9

    Re: C658 finisher

    Quote Originally Posted by emujo2 View Post
    C-1105 is a exit drive problem, not one that can be corrected with firmware. E
    I check the motor, driving belts and claws and all seems normal, and observed the operation with opening the door of finisher.

  5. #5
    Service Manager 2,500+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    3,896
    Rep Power
    178

    Re: C658 finisher

    What is the finisher model?
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

  6. #6
    Service Manager 2,500+ Posts
    C658 finisher

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    north jersey
    Posts
    3,272
    Rep Power
    105

    Re: C658 finisher

    Lower the exit tray and remove the upper panel.
    There are 2 motors with clock disks. Make sure the disks are firmly attached to the motors and that the 2 exit claws are even.
    We know a thing or two because we've seen a thing or two.

  7. #7
    Service Manager 2,500+ Posts
    C658 finisher


    Join Date
    Sep 2005
    Location
    South Jersey
    Posts
    2,575
    Rep Power
    90

    Re: C658 finisher

    Not sure what finisher you have but recall a bulletin for FS-534 and trouble code C-1105.

  8. #8
    Senior Tech 100+ Posts
    Join Date
    May 2018
    Location
    Hong Kong
    Posts
    179
    Rep Power
    9

    Re: C658 finisher

    Quote Originally Posted by tsbservice View Post
    What is the finisher model?
    It's FS-536SD.

  9. #9
    KonicaMinolta Senior Tech 500+ Posts srvctec's Avatar
    Join Date
    Oct 2009
    Location
    Central Kansas
    Posts
    591
    Rep Power
    49

    Re: C658 finisher

    Quote Originally Posted by jwai View Post
    hello,

    could anyone kindly provide the latest firmware of c658?
    one machine often shows c1105 on idle status, i reset the code and display again 1~2days later.
    after i reset, check the operation of finisher and act normal.
    As was already said, not a F/W issue.

    Is the machine in a dirty environment? I had a similar issue on a FS534. C-1105 on FS-534 in Filthy Environment
    Started in the copier service business in the fall of 1988 and have worked at the same company since then, now the senior tech, since 2004.

  10. #10
    Field Service Technician 500+ Posts femaster's Avatar
    Join Date
    May 2011
    Location
    A Small City in MI
    Posts
    538
    Rep Power
    33

    Re: C658 finisher

    Quote Originally Posted by srvctec View Post
    Is the machine in a dirty environment? I had a similar issue on a FS534. C-1105 on FS-534 in Filthy Environment
    I see in the post you linked to that the belt jumped off. I just had to fix one of these late last week. My first experience with that issue thankfully. Machine wasn't in a dirty environment, and was actually fairly low volume. I believe it had about 115K on it total, so not sure what caused it to jump.

    During my initial diagnosis, it seemed like the belt was the cause but I couldn't see it, so couldn't confirm until I pulled the panel off to verify. I was actually surprised to see that there was nothing to hold the belt onto the drive gear. The motor assembly on the other side actually has a small black plastic disk that prevents the belt on that side from jumping off, not sure why they wouldn't have done the same for both.

    Being as resourceful as I could be with what I had on hand, I installed a flat plastic protection disc that is used on the mag roller of BH223 style development units. They come as part of the DS Roll Kit to protect the bearings from toner and developer. It's flimsy, doesn't fit all that snugly on the gear shaft, but I'm hopeful that it will prevent the belt from jumping off again.
    Last edited by femaster; 03-30-2021 at 05:19 AM.
    Ricoh Service Tech for 7 year. Currently a Konica Minolta Service Tech for the last 7 years.
    My Ricoh knowledge is slowly dwindling away at this point. Many things have been lost to time...

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here