Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1
    Technician qaraman's Avatar
    Join Date
    Oct 2019
    Location
    Bethlehem
    Posts
    12
    Rep Power
    9

    Angry Konica 1250 toner piles on charging unit sides after 5000 copies

    I have replaced the developing unit, a new charge unit, new cleaning unit assembly and a new drum, the problem still happens, I have also lowered the density to - 3, any ideas what should I do next? IMG-20210319-WA0000.jpgIMG-20210319-WA0001.jpgIMG-20210319-WA0002.jpgIMG-20210325-WA0025.jpg

  2. #2
    Service Manager 1,000+ Posts
    Konica 1250 toner piles on charging unit sides after 5000 copies

    GIUBOSS's Avatar
    Join Date
    Jul 2013
    Location
    Rome, IT
    Posts
    1,299
    Rep Power
    68

    Re: Konica 1250 toner piles on charging unit sides after 5000 copies

    Quote Originally Posted by qaraman View Post
    I have replaced the developing unit, a new charge unit, new cleaning unit assembly and a new drum, the problem still happens, I have also lowered the density to - 3, any ideas what should I do next? IMG-20210319-WA0000.jpgIMG-20210319-WA0001.jpgIMG-20210319-WA0002.jpgIMG-20210325-WA0025.jpg
    Genuine toner?

  3. #3
    Technician qaraman's Avatar
    Join Date
    Oct 2019
    Location
    Bethlehem
    Posts
    12
    Rep Power
    9

    Re: Konica 1250 toner piles on charging unit sides after 5000 copies

    Quote Originally Posted by GIUBOSS View Post
    Genuine toner?
    Yes sir 100% Genuine.

  4. #4
    Master Of The Obvious 10,000+ Posts
    Konica 1250 toner piles on charging unit sides after 5000 copies

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,442
    Rep Power
    462

    Re: Konica 1250 toner piles on charging unit sides after 5000 copies

    Have a look at the upper cleaning unit seal. It will wear to a tapered edge then fold over, and act like an additional charging device. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  5. #5
    Technician qaraman's Avatar
    Join Date
    Oct 2019
    Location
    Bethlehem
    Posts
    12
    Rep Power
    9

    Re: Konica 1250 toner piles on charging unit sides after 5000 copies

    Quote Originally Posted by blackcat4866 View Post
    Have a look at the upper cleaning unit seal. It will wear to a tapered edge then fold over, and act like an additional charging device. =^..^=
    Thanks for your reply, what you're saying makes sense, however the entire cleaner unit was replaced brand new for this issue.

  6. #6
    Field Supervisor 500+ Posts Woxner's Avatar
    Join Date
    Jul 2011
    Location
    Felixstowe England
    Posts
    780
    Rep Power
    41

    Re: Konica 1250 toner piles on charging unit sides after 5000 copies

    perhaps the transfer belt is not transfering all the toner also replace transfer belt rollers. 951 does same thing.

  7. #7
    Technician qaraman's Avatar
    Join Date
    Oct 2019
    Location
    Bethlehem
    Posts
    12
    Rep Power
    9

    Re: Konica 1250 toner piles on charging unit sides after 5000 copies

    Quote Originally Posted by Woxner View Post
    perhaps the transfer belt is not transfering all the toner also replace transfer belt rollers. 951 does same thing.
    Thanks for the reply, do you suggest I should replace transfer belt and rollers too?

    Sent from my ANE-TL00 using Tapatalk

  8. #8
    RTFM!! 5,000+ Posts allan's Avatar
    Join Date
    Apr 2010
    Location
    Centurion
    Posts
    5,387
    Rep Power
    152

    Re: Konica 1250 toner piles on charging unit sides after 5000 copies

    Quote Originally Posted by qaraman View Post
    Thanks for the reply, do you suggest I should replace transfer belt and rollers too?

    Sent from my ANE-TL00 using Tapatalk

    If its done its yield or close to it. Not much to go wrong on the transfer belt assy.
    The toner dusting in that area would suggest a problem on the cleaning unit the cause of it is unknown but check that there is nothing deforming the cleaning blade.
    Whatever

  9. #9
    Technician qaraman's Avatar
    Join Date
    Oct 2019
    Location
    Bethlehem
    Posts
    12
    Rep Power
    9

    Re: Konica 1250 toner piles on charging unit sides after 5000 copies

    Quote Originally Posted by allan View Post
    If its done its yield or close to it. Not much to go wrong on the transfer belt assy.
    The toner dusting in that area would suggest a problem on the cleaning unit the cause of it is unknown but check that there is nothing deforming the cleaning blade.
    Thank you, will check on Monday. Regards,

    Sent from my ANE-TL00 using Tapatalk

  10. #10
    Service Manager 1,000+ Posts
    Join Date
    Sep 2008
    Location
    Flat Rock Michigan
    Posts
    1,046
    Rep Power
    49

    Re: Konica 1250 toner piles on charging unit sides after 5000 copies

    check the toner suction/anti misting system

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here