Prints are peeling on the edges on Bizhub C364 & C454

[Hishamawada]

Hello,

When printing on stickers (thick 2) and 300 gsm (thick 4).

Tried slowing the speed of the fixer and still same , tried increasing the temp also same .

Any ideas what i could do?



Sent from my SM-G610F using Tapatalk

[Max]

Make sure it's not inkjet/photo paper. Or the pressure is no longer sufficient due to worn out fuser. Compatible toner?? If so, melting point probably different.

[Hishamawada]

300 gsm media is normal glossy paper and the stickers are for digital printers . yes compatible toner is used in both machines . Should i just increase the fixing temp for this specified thickness ?WhatsApp Image 2021-02-22 at 11.07.25 AM.jpg

[Phil B.]

300 gsm media is normal glossy paper and the stickers are for digital printers . yes compatible toner is used in both machines . Should i just increase the fixing temp for this specified thickness ?WhatsApp Image 2021-02-22 at 11.07.25 AM.jpg

Ditch the crap toner.

Sent from my SM-G960U using Tapatalk

[slimslob]

Make sure it's not inkjet/photo paper. Or the pressure is no longer sufficient due to worn out fuser. Compatible toner?? If so, melting point probably different.

Not only different but inconsistent. A variation as little as 1 degree C in the melting point can be the difference between fusing properly sticking to the fusing roller/belt/sleeve. Use only Genuine KM supplies and parts. Otherwise as the old Fram oil filter says,