Results 1 to 9 of 9
  1. #1
    Junior Member Boyaka1989's Avatar
    Join Date
    Mar 2021
    Location
    new-york
    Posts
    3
    Rep Power
    0

    Smile issue with FS-534

    hi how can solve an issue with my finsher that keeps stapling (5 times) after every wake up or if i open the door it did not use to do that before just started to happen ,i took it apart cleaned and put it back still happening i updated the firmeware still noting ,

    any suggestions?

  2. #2
    Aging Tech 2,500+ Posts
    issue with FS-534

    copier addict's Avatar
    Join Date
    Jul 2013
    Location
    Diamond
    Posts
    4,749
    Rep Power
    141

    Re: issue with FS-534

    Quote Originally Posted by Boyaka1989 View Post
    hi how can solve an issue with my finsher that keeps stapling (5 times) after every wake up or if i open the door it did not use to do that before just started to happen ,i took it apart cleaned and put it back still happening i updated the firmeware still noting ,

    any suggestions?
    Is it actually producing staples, or just dry firing?
    If it is not producing staples it means it is trying to advance the next layer of staples. That indicates an issue either with the current staple cartridge or the stapler itself. Try another new cartridge. If that doesn't work it is probably best to have an authorised tech look at it if you are not one.

  3. #3
    Junior Member Boyaka1989's Avatar
    Join Date
    Mar 2021
    Location
    new-york
    Posts
    3
    Rep Power
    0

    Re: issue with FS-534

    Quote Originally Posted by copier addict View Post
    Is it actually producing staples, or just dry firing?
    If it is not producing staples it means it is trying to advance the next layer of staples. That indicates an issue either with the current staple cartridge or the stapler itself. Try another new cartridge. If that doesn't work it is probably best to have an authorised tech look at it if you are not one.
    it is producing staples

  4. #4
    Service Manager 2,500+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    4,044
    Rep Power
    184

    Re: issue with FS-534

    Perhaps stupid question but did you try to power off and unplug the machine for a minute?
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

  5. #5
    Aging Tech 2,500+ Posts
    issue with FS-534

    copier addict's Avatar
    Join Date
    Jul 2013
    Location
    Diamond
    Posts
    4,749
    Rep Power
    141

    Re: issue with FS-534

    Quote Originally Posted by Boyaka1989 View Post
    it is producing staples
    Try what tsbservice suggested.
    If it is producing staples it doesn't see the next layer advancing. Sounds like a staple unit problem. It may be as simple as a stray staple stopping the unit from recognising the staples.
    Remove the current cartridge and check the staple unit for stray staples. Install a new staple cartridge and try that.
    Replacing the staple unit may end up being the answer.

  6. #6
    Junior Member Boyaka1989's Avatar
    Join Date
    Mar 2021
    Location
    new-york
    Posts
    3
    Rep Power
    0

    Re: issue with FS-534

    Quote Originally Posted by copier addict View Post
    Try what tsbservice suggested.
    If it is producing staples it doesn't see the next layer advancing. Sounds like a staple unit problem. It may be as simple as a stray staple stopping the unit from recognising the staples.
    Remove the current cartridge and check the staple unit for stray staples. Install a new staple cartridge and try that.
    Replacing the staple unit may end up being the answer.

    okay when i encountered this issue i did the following; unpluged and waited ,updated the firmware ,replaced the staple cartridge and took out the finsher and cleaned the sensors checked if any stapels stuck nothing helped . the machine is working and stapling my documents but everytime the wakesup its just stapling 5 to 6 times using up the staples .

  7. #7
    RTFM!! 2,500+ Posts allan's Avatar
    Join Date
    Apr 2010
    Location
    Centurion
    Posts
    4,494
    Rep Power
    100

    Re: issue with FS-534

    Quote Originally Posted by Boyaka1989 View Post
    okay when i encountered this issue i did the following; unpluged and waited ,updated the firmware ,replaced the staple cartridge and took out the finsher and cleaned the sensors checked if any stapels stuck nothing helped . the machine is working and stapling my documents but everytime the wakesup its just stapling 5 to 6 times using up the staples .
    Then must be on the stapler unit itself as mentioned . When a new cartridge is installed it will staple 5 times. Not sure if it will do it even if you manual advance the staples then installing it.
    Take the unit out and check to see if it advances the staple correctly and it the sensors are in check.
    Whatever

  8. #8
    Junior Member
    Join Date
    Apr 2021
    Location
    Snedsted
    Posts
    5
    Rep Power
    0

    Re: issue with FS-534

    Quote Originally Posted by Boyaka1989 View Post
    hi how can solve an issue with my finsher that keeps stapling (5 times) after every wake up or if i open the door it did not use to do that before just started to happen ,i took it apart cleaned and put it back still happening i updated the firmeware still noting ,

    any suggestions?
    I have seen this now and again. first change out the whole stabler magazine/container. If still a problem, then change the stapler unit.

  9. #9
    Technician Techlife's Avatar
    Join Date
    Mar 2015
    Location
    Slightly north of Hell
    Posts
    23
    Rep Power
    13

    Re: issue with FS-534

    For what its worth, ive had about 5 or 6 of these, and its always been stuck staples in the cartridge

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here