Page 1 of 3 123 LastLast
Results 1 to 10 of 22

Thread: Bizhub 458

  1. #1
    Senior Tech 100+ Posts afterhours's Avatar
    Join Date
    Mar 2017
    Location
    Tampa, Florida
    Posts
    137
    Rep Power
    10

    Bizhub 458

    Hi everyone. I have a customer with a Bizhub 458 with a LCT large capacity tray 3. Every time the machine feeds out of tray 3 we either get a wrong paper size error or jam 99-01. We ended up swapping the LCT but its still doing the same exact thing.

    Any help will be appreciated.
    Im a Loser Baby!!!

  2. #2
    Service Manager 2,500+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    3,896
    Rep Power
    178

    Re: Bizhub 458

    Quote Originally Posted by afterhours View Post
    Hi everyone. I have a customer with a Bizhub 458 with a LCT large capacity tray 3. Every time the machine feeds out of tray 3 we either get a wrong paper size error or jam 99-01. We ended up swapping the LCT but its still doing the same exact thing.

    Any help will be appreciated.
    This is from machine setup?
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

  3. #3
    Senior Tech 250+ Posts Max's Avatar
    Join Date
    Oct 2011
    Posts
    449
    Rep Power
    26

    Re: Bizhub 458

    There should be a paper size option for lct in service mode. Or sticky/dirty sensor perhaps.

  4. #4
    Senior Tech 100+ Posts afterhours's Avatar
    Join Date
    Mar 2017
    Location
    Tampa, Florida
    Posts
    137
    Rep Power
    10

    Re: Bizhub 458

    This is a used machine at the customers office. Paper path is clean. Sensors have been checked.

    Sent from my SM-G981U using Tapatalk
    Im a Loser Baby!!!

  5. #5
    Senior Tech 100+ Posts afterhours's Avatar
    Join Date
    Mar 2017
    Location
    Tampa, Florida
    Posts
    137
    Rep Power
    10

    Re: Bizhub 458

    I checked the paper size option for the lct and it is correct.

    Sent from my SM-G981U using Tapatalk
    Im a Loser Baby!!!

  6. #6
    Aging Tech 2,500+ Posts
    Bizhub 458

    copier addict's Avatar
    Join Date
    Jul 2013
    Location
    Diamond
    Posts
    4,469
    Rep Power
    129

    Re: Bizhub 458

    Quote Originally Posted by afterhours View Post
    I checked the paper size option for the lct and it is correct.

    Sent from my SM-G981U using Tapatalk

    If this is the LCT that sits under the machine check the yellow paper separator guide and be sure it moves freely

  7. #7
    Field Supervisor 500+ Posts
    Join Date
    Mar 2017
    Posts
    947
    Rep Power
    44

    Re: Bizhub 458

    Be sure that the marketing area is set correctly, the size setting of the LCT is correct LT for US markets. Firmware and funtion version are up to date and softswitch 10 is set correctly. This is the basics..where does the paper stop when it jams, any unusual noise or grinding as the paper attempts to push into the main feed area? Can you get an internal test print (gui, config page ect) to print. How many copies on the system. I assume bypass tray works as well, and if you've replaced the LCT the issue must be confined to the area where paper moves fout of the LCT and into the main feed path. Any kicks on the lead edge? We have been troubleshooting this 9901 code since the e series..E

  8. #8
    Senior Tech 100+ Posts afterhours's Avatar
    Join Date
    Mar 2017
    Location
    Tampa, Florida
    Posts
    137
    Rep Power
    10

    Re: Bizhub 458

    Quote Originally Posted by copier addict View Post
    If this is the LCT that sits under the machine check the yellow paper separator guide and be sure it moves freely
    Can you describe what you mean by the yellow paper seperator.

    Sent from my SM-G981U using Tapatalk
    Im a Loser Baby!!!

  9. #9
    Senior Tech 100+ Posts afterhours's Avatar
    Join Date
    Mar 2017
    Location
    Tampa, Florida
    Posts
    137
    Rep Power
    10

    Re: Bizhub 458

    Quote Originally Posted by emujo2 View Post
    Be sure that the marketing area is set correctly, the size setting of the LCT is correct LT for US markets. Firmware and funtion version are up to date and softswitch 10 is set correctly. This is the basics..where does the paper stop when it jams, any unusual noise or grinding as the paper attempts to push into the main feed area? Can you get an internal test print (gui, config page ect) to print. How many copies on the system. I assume bypass tray works as well, and if you've replaced the LCT the issue must be confined to the area where paper moves fout of the LCT and into the main feed path. Any kicks on the lead edge? We have been troubleshooting this 9901 code since the e series..E
    Firmware is up to date. The machine has 53k total on it. I'll check soft switch 10.

    Sent from my SM-G981U using Tapatalk
    Im a Loser Baby!!!

  10. #10
    Senior Tech 100+ Posts afterhours's Avatar
    Join Date
    Mar 2017
    Location
    Tampa, Florida
    Posts
    137
    Rep Power
    10

    Re: Bizhub 458

    Quote Originally Posted by emujo2 View Post
    Be sure that the marketing area is set correctly, the size setting of the LCT is correct LT for US markets. Firmware and funtion version are up to date and softswitch 10 is set correctly. This is the basics..where does the paper stop when it jams, any unusual noise or grinding as the paper attempts to push into the main feed area? Can you get an internal test print (gui, config page ect) to print. How many copies on the system. I assume bypass tray works as well, and if you've replaced the LCT the issue must be confined to the area where paper moves fout of the LCT and into the main feed path. Any kicks on the lead edge? We have been troubleshooting this 9901 code since the e series..E
    The paper stops when it reaches tray 2. You hear the paper buckle just before this happens.

    If I cheat the door it comes.out of the lct just fine but then obviously jam due to the door being open.

    Sent from my SM-G981U using Tapatalk
    Im a Loser Baby!!!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here