Fiery C658

[rrrohan]

Having trouble with Fiery

Replaced it's HDD.
Reloaded software.
Installed on copier.
Fiery button appears in menu but I get the attached errors.

I can access it via machines web browser on 172.17.249.1

I ran intial setup

Copier gets a fiery address of 172.17.249.2 and a LAN IP.

Can print direct to machine via it's 192.168.0.33 address

Fiery address won't work.

Also if I try to enter network settings on copier the "failed to connect to controller" msg and boots me back to menu if I click ok

No idea what I'm doing wrong

Sent from my Pixel 4 XL using Tapatalk

[Synthohol]

the fiery should be at 192.168.0.32 as it assigns the copier 1 number up from itself.
the 172. address is just a dummy address displayed.

[emujo2]

Shot in the dark, but try turning off SSLv3 on the MFP side. E

[rrrohan]

Shot in the dark, but try turning off SSLv3 on the MFP side. E

im a fiery noob.

i updated firmware, set to v4.2 disabled IP filtering and enabled RAW printing

something fixed it in that process.

I assume there is a installation guide but my supervisor said he only had it for the older Windows based fiery

anyway got it working, thanks