Results 1 to 9 of 9
  1. #1
    Senior Tech 250+ Posts
    Bizhub 363 Error C-C152

    tulintron's Avatar
    Join Date
    Jul 2014
    Location
    Belo Horizonte, Minas Gerais
    Posts
    419
    Rep Power
    22

    Bizhub 363 Error C-C152

    Hello everybody. This old BH363 with error C-C152 appeared in our laboratory after improper updating. Documents state FW change after Japan earthquake. According to the documentation, I have FW needed for solution, but I can't finish it. Always features C-C152. As an old printer, I believe that someone here has been there before. Need help. Thanks

    Earthquake Bulletin
    https://mega.nz/file/GDJRFQTS#40T1Dx...eCVxbK8RJru1N0

    Firmware Documentation
    https://mega.nz/file/LbIjSKyR#rH9K94...4D5Hujo53au2jM

    Final Result
    https://mega.nz/file/PXATTCbJ#ukwWjn...0ocz20LIG35vss

    The Firmware Documentation file has the step by step on the last pages. I followed, but I was not successful.
    Thanks for any help
    Nothing like day after day

  2. #2
    Service Manager 2,500+ Posts
    Bizhub 363 Error C-C152

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    north jersey
    Posts
    3,296
    Rep Power
    114

    Re: Bizhub 363 Error C-C152

    The 3 series has Stand alone scanner firmware.
    I used to run into that a lot before the series was discontinued.
    If you don't have access to it PM me and I'll help you out.
    We know a thing or two because we've seen a thing or two.

  3. #3
    Service Manager 2,500+ Posts
    Bizhub 363 Error C-C152

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    north jersey
    Posts
    3,296
    Rep Power
    114

    Re: Bizhub 363 Error C-C152

    G8x-09 is the scanner only firmware for the whole 3 mono series.
    I'll have to add it to my server later when I get home and give you the link.
    We know a thing or two because we've seen a thing or two.

  4. #4
    Senior Tech 250+ Posts
    Bizhub 363 Error C-C152

    tulintron's Avatar
    Join Date
    Jul 2014
    Location
    Belo Horizonte, Minas Gerais
    Posts
    419
    Rep Power
    22

    Re: Bizhub 363 Error C-C152

    These FWs I don't have.
    Nothing like day after day

  5. #5
    Senior Tech 250+ Posts
    Bizhub 363 Error C-C152

    tulintron's Avatar
    Join Date
    Jul 2014
    Location
    Belo Horizonte, Minas Gerais
    Posts
    419
    Rep Power
    22

    Re: Bizhub 363 Error C-C152

    Quote Originally Posted by tulintron View Post
    These FWs I don't have.
    Synth, due to my English, we may not communicate well. I have the G00-C8 FW version.

    There are 03 FW in it.


    G00-02 = BootRom Ver.
    G00-09 = G8X-09 Scanner Ver.
    G00-C8 = Mass Product. Ver.


    For each CPU altered due to the earthquake, the G8x-09 file performs the correct FW. In my case, H8S / 2324 would be the G00-09.


    These files I have with me.


    The FW G8x-09 (Scanner Ver.) Recognizes the 04 CPU below:


    H8S / 2324: A1UD0Y0-0023-G00-09 Check Sum 0DDA
    H8S / 2325: A1UD0Y0-0023-G80-09 Check Sum 7F0E
    H8S / 2424: A1UD0Y0-0023-G82-09 Check Sum BA94
    H8S / 3006: A1UD0Y0-0023- G81-09 Check Sum F469

    Procedure performed according to documentation, but without success.
    Nothing like day after day

  6. #6
    Service Manager 2,500+ Posts
    Bizhub 363 Error C-C152

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    north jersey
    Posts
    3,296
    Rep Power
    114

    Re: Bizhub 363 Error C-C152

    The d6 firmware I linked is the latest, yours was older.
    Flash the d6 firmware and if the scanner still says ng use the scanner only fw I linked.
    We know a thing or two because we've seen a thing or two.

  7. #7
    Senior Tech 250+ Posts
    Bizhub 363 Error C-C152

    tulintron's Avatar
    Join Date
    Jul 2014
    Location
    Belo Horizonte, Minas Gerais
    Posts
    419
    Rep Power
    22

    Re: Bizhub 363 Error C-C152

    Quote Originally Posted by emujo2 View Post
    Are you sure you are looking at this correctly..

    Program Name File Name Checksum Note
    Scanner (H8S/2324) A1UD0Y0-0023-G00-09 0DDA



    The Board number for the MFP board mounted with the current microprocessor (H8S/2324) :
    A1UDH020/A1UDH021

    Which MFP board do you have?
    This is my board - (H8S/2324) :
    A1UDH020/A1UDH021
    Nothing like day after day

  8. #8
    Senior Tech 250+ Posts
    Bizhub 363 Error C-C152

    tulintron's Avatar
    Join Date
    Jul 2014
    Location
    Belo Horizonte, Minas Gerais
    Posts
    419
    Rep Power
    22

    Re: Bizhub 363 Error C-C152

    I did so many procedures that I can't explain which one allowed me to update the scanner with the G00-D6 version.


    We finally made it. Thanks again, Synth.
    Nothing like day after day

  9. #9
    Service Manager 2,500+ Posts
    Bizhub 363 Error C-C152

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    north jersey
    Posts
    3,296
    Rep Power
    114

    Re: Bizhub 363 Error C-C152

    thats what we are here for
    We know a thing or two because we've seen a thing or two.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here