Hi there guys,
Now I've had a similar issue when my black developer was running out.
Am I right to suspect this coming from the Cyan developer?
Sent from my SM-G955F using Tapatalk
Hi there guys,
Now I've had a similar issue when my black developer was running out.
Am I right to suspect this coming from the Cyan developer?
Sent from my SM-G955F using Tapatalk
Yup confirmed it. Trying to get developer in
Sent from my SM-G955F using Tapatalk
Please check the magenta and cyan drums as well. red line in the corner suggests magenta drum its most likely need to change.
if this is a 4 series device(224e/364e/454e/554e) ; there is common issues with the hopper bushing and toner empty sensor causing this .
more info Konica Minolta Bizhub C224e C-2557 error
hope this helps
If the cyan drum is near or beyond life, replace that at the same time as the dev unit, or you may drain your new unit. Has happened to me a couple times when I was in a hurry and forgot to check the drum life... Second time was more than enough for me, now if a dev unit drains before it's time, the drum gets replaced at the same time. Haven't lost a second dev unit since.
A Ricoh Service Tech for 7 year. A Konica Minolta Service Tech for 7 years. Now, KM service manager for 3 years.
My Ricoh knowledge is slowly dwindling away at this point. Many things have been lost to time...
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
Bookmarks