Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1
    Senior Tech 100+ Posts
    c360 wont copy or print. Machine comes to ready


    Join Date
    Oct 2010
    Posts
    111
    Rep Power
    23

    c360 wont copy or print. Machine comes to ready

    Gentlemen

    I searched for an answer nothing came close. Machines comes to ready. If I go into test mode to do a test print, start button never turns blue. If I copy something, on the glass or feeder. It'll say copy stopped. ready to accept another job. You can scan from it to a computer but you can't print from one. The customer was having network issues the day before. For trouble shooting I installed firmware. Disconnected the document feeder. Checked connections on MFP board. I'm going to bring with me a MFP board, nvram. Not sure about motor control board. Any of you run across this problem?

  2. #2
    Senior Tech 250+ Posts
    c360 wont copy or print. Machine comes to ready

    tulintron's Avatar
    Join Date
    Jul 2014
    Location
    Belo Horizonte, Minas Gerais
    Posts
    419
    Rep Power
    22

    Re: c360 wont copy or print. Machine comes to ready

    Did the connectivity test through the ping command at cmd prompt?


    Did you print the driver test page?


    What is the status of the front LED on the touch panel during job submission?


    What is the useful life of consumables?
    Nothing like day after day

  3. #3
    Service Manager 10,000+ Posts
    c360 wont copy or print. Machine comes to ready

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    14,191
    Rep Power
    373

    Re: c360 wont copy or print. Machine comes to ready

    Quote Originally Posted by adecanmin View Post
    Gentlemen

    I searched for an answer nothing came close. Machines comes to ready. If I go into test mode to do a test print, start button never turns blue. If I copy something, on the glass or feeder. It'll say copy stopped. ready to accept another job. You can scan from it to a computer but you can't print from one. The customer was having network issues the day before. For trouble shooting I installed firmware. Disconnected the document feeder. Checked connections on MFP board. I'm going to bring with me a MFP board, nvram. Not sure about motor control board. Any of you run across this problem?
    sounds like they changed IP settings.

    do you have a copy of the network setting before the problem?

    compare and make changes

  4. #4
    service technician 50+ Posts
    Join Date
    Feb 2018
    Location
    Kankakee, ill
    Posts
    50
    Rep Power
    7

    Re: c360 wont copy or print. Machine comes to ready

    if they were having network issue did you unplug network line and reboot machine with it off and are still having issues. also do a network initialize to reset to factory defaults. might be hdd related too? worse case might try a all clear.

  5. #5
    Service Manager 2,500+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    4,044
    Rep Power
    184

    Re: c360 wont copy or print. Machine comes to ready

    Life stop set at consumables end.
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

  6. #6
    Field Supervisor 500+ Posts
    Join Date
    Mar 2017
    Posts
    995
    Rep Power
    49

    Re: c360 wont copy or print. Machine comes to ready

    TSBservice is 100% correct..one or more of the consumables has reached the end of life.

  7. #7
    Senior Tech 100+ Posts
    c360 wont copy or print. Machine comes to ready


    Join Date
    Oct 2010
    Posts
    111
    Rep Power
    23

    Re: c360 wont copy or print. Machine comes to ready

    Thanks for all the responses. I got sidetracked by the network issues and went down that rabbit hole. I think it is the consumables life stop. The customer left the office early so I'll have to go back Monday. I did disconnect the network cable to try to copy to no avail. I have all the life stop indicators turned off but I remember there was one that could be missed and it would shut the machine down with no warning on the touchscreen . If I would of logged into the interface I would of seen it. Veteran mistake.

  8. #8
    Service Manager 2,500+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    4,044
    Rep Power
    184

    Re: c360 wont copy or print. Machine comes to ready

    Quote Originally Posted by adecanmin View Post
    Thanks for all the responses. I got sidetracked by the network issues and went down that rabbit hole. I think it is the consumables life stop. The customer left the office early so I'll have to go back Monday. I did disconnect the network cable to try to copy to no avail. I have all the life stop indicators turned off but I remember there was one that could be missed and it would shut the machine down with no warning on the touchscreen . If I would of logged into the interface I would of seen it. Veteran mistake.
    Not a mistake. I was down the rabbit hole few days ago. It took me all day long to install one machine with SafeQ. They left the building and I was so angered so finished install remotely after driving 2 hours to home.
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

  9. #9
    Service Manager 10,000+ Posts
    c360 wont copy or print. Machine comes to ready

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    14,191
    Rep Power
    373

    Re: c360 wont copy or print. Machine comes to ready

    Quote Originally Posted by adecanmin View Post
    Thanks for all the responses. I got sidetracked by the network issues and went down that rabbit hole. I think it is the consumables life stop. The customer left the office early so I'll have to go back Monday. I did disconnect the network cable to try to copy to no avail. I have all the life stop indicators turned off but I remember there was one that could be missed and it would shut the machine down with no warning on the touchscreen . If I would of logged into the interface I would of seen it. Veteran mistake.
    hey brother we are all human (despite what the customers want) we get our heads wrapped around one point and sometimes it hard to shift gears.

    sounds like you have a grasp on things.

  10. #10
    Senior Tech 100+ Posts
    c360 wont copy or print. Machine comes to ready


    Join Date
    Oct 2010
    Posts
    111
    Rep Power
    23

    Re: c360 wont copy or print. Machine comes to ready

    I'll be ready Monday morning!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here