1-4gb usb 2.0
1-4gb usb 2.0
backup the copier settings, go to service, initialization, initialize all. if this fails to complete unhook, not just unset, hdd and try again. if it initializes with hdd off there is a problem in the storage system. if unit has latest sata firmware the hdd is going to fail soon. After successful initialization firmware should take , if you still cant make it happen do the board reset routine ,set machine type correctly and flash it. good luck and have fun.
Synthohol
2,4,8 and 16GBwhat size are the drives?
zoool
Data clear done and put pendrive in rear socket but nothing changemake DATA CLEAR i service mode.
put pendrive with firmware to board socket usb 3.0 . dont use front usb.
write recovery sata controller to machine. not always is working i dont know how..
when you will make it write firmware.
every c308 i have put on legs after this.
1 time i have trouble and machine dost see my pendrive and after few tries and changed with firmware its work..
good luck.
Albonline
I'll test this tomorrow.backup the copier settings, go to service, initialization, initialize all. if this fails to complete unhook, not just unset, hdd and try again. if it initializes with hdd off there is a problem in the storage system. if unit has latest sata firmware the hdd is going to fail soon. After successful initialization firmware should take , if you still cant make it happen do the board reset routine ,set machine type correctly and flash it. good luck and have fun.
Right now, the firmware version in the machine is GC2-X4 because using ISW with FTP server work it but not spanish language loaded (mkMSG7.bat language file executed before load de firmware)
anybody have the Reset Tool and procedure for BH C458? I can't find it in Knova, only can see for C368 serie and the procedure for it but only for C368 series.
Thanks
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
I recently was at a different machine (C308) and it would not accept the firmware either, I had 5 different usb sticks and none worked!
In the end I downloaded a formatting tool called Rufus Rufus - Create bootable USB drives the easy way and formatted the drives and then it worked!
I use this USB Flash Drive and allways succes.
I posted this several weeks ago, but I was able to leave my machine powered on for several weeks, while I was out of town for vacation, and right before I delivered the machine, it finally took the firmware. Tried everything suggested in this rherad, as I had done many times before, with no success.
OC
Bookmarks