hello everyone, I have a problem with a c280.
When I print front and back in a3 format I hear a "stok" noise and the sheet is creased.
In a4 format everything is ok.
Possible solutions.
Thank you
hello everyone, I have a problem with a c280.
When I print front and back in a3 format I hear a "stok" noise and the sheet is creased.
In a4 format everything is ok.
Possible solutions.
Thank you
I tried in another drawer but the result is the same.
the problem is at the end of the sheet. It seems that when he turns the paper, too much is taken. rollers aren't new.
Try another paper. If you're using thick paper tell the machine gsm weight.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
stop the print at different intervals and see WHEN the crease occurs.
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
I agree with Synthohol. Stop the print and see where the problem occurs. Photo of the problem sheet would not be bad
Nothing like day after day
Bookmarks