C6100 P/N for wheels

[reckless]

Thanks I ordered the cheaper set of wheels and I will let everyone knows how it goes when I receive them.

[rrrohan]

Yes thank you we have fork lifts and pallet jacks and tough workers. Lifting it won't be an issue. After we install them I have to hire a minolta tech to install the machine. I hope we can use the RU-518 in place of a finisher.

I left a message for the ACM rep. The part number I gave her might have been wrong. The 4061-1010-00 is different than what is written in the part manual?

a relay unit is pointless without the finisher

[reckless]

Cheap wheels are too small, sending them back and ordering larger more expensive set.

My RU-518 relay unit has an exit tray. Since we are printing double sided 13x19 sheets only I don't think we need a fancy finisher. I could be wrong. I do have a PB-503 Id love to hook up but its a headache.

[reckless]

Are wheels needed or can we use this?IMG-20210615-WA0003.jpg

[Albonline]

yes, alignment and levelness are the considerations here.