Thanks: 
Likes: harbor freight, home depot, lots of places to get new castors.
even the bottom of a dolly has good castors.
better yet, grainger.
castor wheel heavy duty products - Grainger Industrial Supply
i PM'd you the right pages..
Dislikes: 0
harbor freight, home depot, lots of places to get new castors.
even the bottom of a dolly has good castors.
better yet, grainger.
castor wheel heavy duty products - Grainger Industrial Supply
i PM'd you the right pages..
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
Synth YOU are da man!Originally Posted by Synthohol
sign up with ACM, they can order koinca parts pretty good prices. that needs to be level, so I wouldn't use an aftermarket caster.
What is ACM?
Nvm, I googled and found them. Thanks for the advice, will order from them. I agree castors need to be same to perfectly level.
thanks a MILLION! I needed this. Hoping to self service this machine but dont plan on using any finishers, hoping that will make less points of failure.
Nice work All !
I'm posting this for all who need in the future also said i would earlier.
https://www.acmtech.com/ I deal with the Hadley Mass. location and the lady there in charge of parts really goes out of her way for you and is very polite. Donna Sullivan
Precision roller has some for limited models Konica Minolta 4061-1010-00 (4061101000) Caster(details)Genuine Konica Minolta Part.
Nice work All !
I'm posting this for all who need in the future also said i would earlier.
https://www.acmtech.com/ I deal with the Hadley Mass. location and the lady there in charge of parts really goes out of her way for you and is very polite. Donna Sullivan
Precision roller has some for limited models Konica Minolta 4061-1010-00 (4061101000) Caster(details)Genuine Konica Minolta Part.
Hopefully you've got a fork lift nearby to gain access to them. This MFP is not light. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Yes thank you we have fork lifts and pallet jacks and tough workers. Lifting it won't be an issue. After we install them I have to hire a minolta tech to install the machine. I hope we can use the RU-518 in place of a finisher.
I left a message for the ACM rep. The part number I gave her might have been wrong. The 4061-1010-00 is different than what is written in the part manual?
These wheels look same to me and are $70 cheaper each. Does anyone have an opinion on this they would like to share?
K1007.wh.jpg
Reply With Quote
Bookmarks