C6100 P/N for wheels

[reckless]

Can someone help me figure out the part numbers for the wheels underneath the Konica Minolta C6100? I can't find it in the service manual.

[Phil B.]

Can someone help me figure out the part numbers for the wheels underneath the Konica Minolta C6100? I can't find it in the service manual.

part numbers are found in the PARTS MANUAL.

[reckless]

I have the quick manual and service manual. Is there a third parts manual? Forgive my ignorance as I am new to this.

Also, wouldn't same part be used across ALL accuriopress machines? The little wheels underneath main engine?

[Phil B.]

I have the quick manual and service manual. Is there a third parts manual? Forgive my ignorance as I am new to this.

Also, wouldn't same part be used across ALL accuriopress machines? The little wheels underneath main engine?

might help if you posted pictures of the little wheels since you don't know the NAME of the 'wheels'.

no not all parts are used across all lines.. usually different parts for different speed machines

[Synthohol]

i think he means the ones that support the machine.
front and back are different #s

[reckless]

WhatsApp Image 2021-05-25 at 5.17.16 PM.jpgWhatsApp Image 2021-05-25 at 5.17.16 PM (1).jpg

Perfect! Where did you get this information? I searched service manual and didn't see it.

I googled and found the wheels are $70 from a polish website. Is there a good dealer/aftermarket place to buy these wheels?

The diagram shows 2 wheels my machine has 4. Maybe I missed the other two? I need to replace 2 wheels.

[rrrohan]

Might be quicker to just go to a decent hardware store and buy some generic ones

But I guess you'd have to then do all 4 plus any on finisher and LU to be sure they are same height. Yeah maybe just get genuine ones

[Phil B.]

i think he means the ones that support the machine.
front and back are different #s

for so,e reason I can't open your attachment...

your talking about the cabinet wheel? or under the whole machine?

ok I couldn't gather that from his 'explanation'

thanks brother.

[Phil B.]

WhatsApp Image 2021-05-25 at 5.17.16 PM.jpgWhatsApp Image 2021-05-25 at 5.17.16 PM (1).jpg

Perfect! Where did you get this information? I searched service manual and didn't see it.

I googled and found the wheels are $70 from a polish website. Is there a good dealer/aftermarket place to buy these wheels?

The diagram shows 2 wheels my machine has 4. Maybe I missed the other two? I need to replace 2 wheels.

I always called them "casters"

[40yearsplus]

Ill ask my work Associate tomorrow. There is a Company in Mass. where they are very helpful and can get you most any Konica part you want we have used.

We also got the casters.

Also you can call a machine wholesaler and ask them if they have any from trash units they have and you can pay for them.