Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Jun 2020
    Location
    South Africa
    Posts
    72
    Rep Power
    3

    B758 Jamming 9201/9202/9203/3201 Double sides

    Hi guys i need help with a bizhub 758 , 1mil copies , jamming double sided , the mc jams only doing double sided firmware was on R9, jam code 3201 , updated firmware to X8 mc than started jamming 9201-02-03 only on double sided , single sided the mc doesnt jam , tested another exit section , duplex section ,fusing unit , removed the registration actuator, without the actuator the machine works fine after a couple double sided copies than starts jamming again , initialized firmware switch 25 hex B0 , 69 hex 2 , 145 hex 1 on , adjusted loop , any suggestions....

    Sent from my SM-A505F using Tapatalk

  2. #2
    Field Supervisor 500+ Posts Woxner's Avatar
    Join Date
    Jul 2011
    Location
    Felixstowe England
    Posts
    667
    Rep Power
    32

    Re: B758 Jamming 9201/9202/9203/3201 Double sides

    repl the reverse unit past the fuser. bearing slips

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here