Stuck on bars

[elmaligno]

In this case you might have a faulty controllerboard or nvram/ssd (in case that's a discrete part on this crap lexmark board).
I couldn't see any recovery tools in knova. You might be able to fix it with a parts donator, otherwise I'd probably just forward it to the sales guys before ordering any
stuff based on guessworks. I sure guess the prices for these "Bizmark" PCBs are probably ridiculously high.

I'm afraid that's what happens, that's why I was asking if anyone knew anything else, since the C3350s have the same software and there is a boot firmware for them.

[strider5555]

You can try booting up the machine into extra service mode by holding the sub power switch on the panel while turning on the main switch. If it boots to the CE password screen, you may be able to flash with the latest base firmware, and also possibly format the HDD. Also if you haven't already, make sure the network cable is disconnected.