Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Stuck on bars

  1. #1
    Technician elmaligno's Avatar
    Join Date
    Oct 2009
    Posts
    16
    Rep Power
    24

    Stuck on bars

    Hi guys, I have a Bizhub 4050 that gets stuck on the bars after powering it on. The engine runs before, but the panel still shows the bars. is there any recovery tool or FW for it?
    Thanks.

  2. #2
    Service Manager 5,000+ Posts
    Stuck on bars

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    6,039
    Rep Power
    139

    Re: Stuck on bars

    Quote Originally Posted by elmaligno View Post
    Hi guys, I have a Bizhub 4050 that gets stuck on the bars after powering it on. The engine runs before, but the panel still shows the bars. is there any recovery tool or FW for it?
    Thanks.
    Start by updating the regular firmware before you start replacing boards etc.
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  3. #3
    Technician elmaligno's Avatar
    Join Date
    Oct 2009
    Posts
    16
    Rep Power
    24

    Re: Stuck on bars

    Quote Originally Posted by copier tech View Post
    Start by updating the regular firmware before you start replacing boards etc.
    I think it's great that you try to sell your crap here, but this is a serious site and I am a technician with 30 years of experience that does not need to come with nonsense like that. This machine does not support firmware upgrade without booting, which does not happen, and that is the reason for my question.

  4. #4
    Service Manager 5,000+ Posts
    Stuck on bars

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    6,039
    Rep Power
    139

    Re: Stuck on bars

    Quote Originally Posted by elmaligno View Post
    I think it's great that you try to sell your crap here, but this is a serious site and I am a technician with 30 years of experience that does not need to come with nonsense like that. This machine does not support firmware upgrade without booting, which does not happen, and that is the reason for my question.
    For someone so experienced you should know about the recovery firmware!


    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  5. #5
    Technician elmaligno's Avatar
    Join Date
    Oct 2009
    Posts
    16
    Rep Power
    24

    Re: Stuck on bars

    Quote Originally Posted by copier tech View Post
    For someone so experienced you should know about the recovery firmware!


    I was expecting a comment like that, which shows you don't know what you are talking about, as these machines are Lexmark based and cannot be booted with firmware from the usb.
    If you are so smart and you have the firmware you seem to be talking about, show it to us!

  6. #6
    Service Manager 2,500+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    4,206
    Rep Power
    190

    Re: Stuck on bars

    Try to unplug HDD and see it will get past boot screen and error out.
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

  7. #7
    Technician elmaligno's Avatar
    Join Date
    Oct 2009
    Posts
    16
    Rep Power
    24

    Re: Stuck on bars

    Quote Originally Posted by tsbservice View Post
    Try to unplug HDD and see it will get past boot screen and error out.
    Thanks a lot, but as I said, I did that and disconnected fax too.

  8. #8
    Service Manager 1,000+ Posts Gift's Avatar
    Join Date
    Mar 2011
    Location
    Gothenburg
    Posts
    1,077
    Rep Power
    37

    Re: Stuck on bars

    Is it possible to access the web interface?

  9. #9
    Technician elmaligno's Avatar
    Join Date
    Oct 2009
    Posts
    16
    Rep Power
    24

    Re: Stuck on bars

    Quote Originally Posted by Gift View Post
    Is it possible to access the web interface?
    no, it is not possible

  10. #10
    Service Manager 1,000+ Posts Gift's Avatar
    Join Date
    Mar 2011
    Location
    Gothenburg
    Posts
    1,077
    Rep Power
    37

    Re: Stuck on bars

    Quote Originally Posted by elmaligno View Post
    no, it is not possible
    In this case you might have a faulty controllerboard or nvram/ssd (in case that's a discrete part on this crap lexmark board).
    I couldn't see any recovery tools in knova. You might be able to fix it with a parts donator, otherwise I'd probably just forward it to the sales guys before ordering any
    stuff based on guessworks. I sure guess the prices for these "Bizmark" PCBs are probably ridiculously high.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here