Results 1 to 6 of 6
  1. #1
    Service Manager 1,000+ Posts
    koinca minolta bizhub 558e doc feeder jam

    brent's Avatar
    Join Date
    Nov 2008
    Location
    Kellogg Idaho
    Posts
    1,030
    Rep Power
    37

    koinca minolta bizhub 558e doc feeder jam

    so customer states the machine is jamming in scanning mode.. sure enough so I replace all feed tires (not the sep) it seems the feeder feeds way faster then in a scan to copy mode. anyways the paper wants to jam sometimes whenthe sheet is about 2 inches out of the exit roller section random sometimes nothing..
    so I got thinking.. the room is right around 85 degrees hot as hell paper felt a little wet.. I couldnt think of anything else to tell the customer then to turn the air conditioning on.. she thought i was craxy but the paper was wet.. anyone else run into this? customer was supposed to get back with me but never did just trying to figure out if anyone else has fought this.. I could bring some of my own paper.. or swap doc feeder as well cleaning all the rollers heped as well as replacing the consumable rollers thank you all


    brent

  2. #2
    Master Of The Obvious 10,000+ Posts
    koinca minolta bizhub 558e doc feeder jam

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    19,773
    Rep Power
    380

    Re: koinca minolta bizhub 558e doc feeder jam

    A jam code would be helpful.

    And yes, the document feeder slows down to print speed when copying, but can scan at full speed when just scanning. So yes, any original misfeeds are more likely when scanning ... over copying. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    Service Manager 1,000+ Posts
    koinca minolta bizhub 558e doc feeder jam


    Join Date
    Mar 2012
    Posts
    1,186
    Rep Power
    44

    Re: koinca minolta bizhub 558e doc feeder jam

    Is it jamming on the first/single sheet or only on multiple originals?

    Not on this model, but I have cleared some headscratchers by simply running the thickest paper the ADF will tolerate.

    If the humidity is that bad there are probably jams on the printing paper path too. I would bring my own paper and prove to the customer that unless she wants to go to a offset printing press with air feed, etc she must create a suitable environment for this or any MFP.

    You could also try running the humid originals through the MFP to dry em out to prove it

  4. #4
    Service Manager 2,500+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    4,349
    Rep Power
    196

    Re: koinca minolta bizhub 558e doc feeder jam

    Why not replace whole set of rollers? Separation roller came along with its torque limiter integrated usually. And Yes jam code could come handy.
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

  5. #5
    Service Manager 1,000+ Posts
    koinca minolta bizhub 558e doc feeder jam

    brent's Avatar
    Join Date
    Nov 2008
    Location
    Kellogg Idaho
    Posts
    1,030
    Rep Power
    37

    Re: koinca minolta bizhub 558e doc feeder jam

    did not replace the sep roller as I didnt' have one.. we will see how this pans out.. I feel it was too hot in the room as I was personally in
    the room and it was wet and sticky.. we will see lol


    thanks brent

  6. #6
    Service Manager 2,500+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    4,349
    Rep Power
    196

    Re: koinca minolta bizhub 558e doc feeder jam

    Quote Originally Posted by brent View Post
    did not replace the sep roller as I didnt' have one.. we will see how this pans out.. I feel it was too hot in the room as I was personally in
    the room and it was wet and sticky.. we will see lol


    thanks brent
    Yes good tech has some guts feeling. However machines have also temperature/humidity sensors incorporated plus jam code history 😉
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here