i series scanning

[jwai]

Dear all,

I wanna ask i series can support items below on scanning?
SMB 3.0
SFTP protocol


Best regards

[emujo2]

None of the KM support SFTP scanning, as far as SMB 3.0, this is still pretty confusing..When the tech specs mention SMB scanning support they list SMB 1.0/2.0/3.0, but they are referring to using the machine as a scan to device..If you wasnt to scan to the HDD then SMB 3.0 is supported. Scanning out to a folder is still a little muddy. There are only settings for how it authenticates to the folder (NTLM/ Kerberos) it does not mention SMB version at all. I know these devices can scan to SMB 1.0 and 2.0 (1.0 disabled after the wannacry scare) but I cannot prove by looking at any documentation that the MFP will scan out using the 3.0 protocol. All referances to 3.0 deal with the server side settings. E