bizhub 600 "Now Warming Up Ready to Scan Some Time Ready

[manzoorwighio]

Bizhub 600 Show Now Warming Up Ready to Scan , Some time Ready , Or Some time Show Error C2801

I Also Tried to Clean Sensor TCSB But Same Problem

[tulintron]

Bizhub 600 Show Now Warming Up Ready to Scan , Some time Ready , Or Some time Show Error C2801

I Also Tried to Clean Sensor TCSB But Same Problem

Description

Intermittent "Now Warming Up" message.

C-28xx error code may also be indicated.
Copies/prints may be "gray".
Copy/print jobs not being output, stuck in job list.
Engine list prints cannot be output.


Solution
CAUSE:Machine isfailingtocomplete a DMAX/Gamma check. Dirty/failed Toner Control Sensor Board and/or possible failed PRCB.
SOLUTION:Check Service Call Countersfor excessive counts.Clean or replace the Toner Control Sensor Board (p/n 56AA -910 2E). Replace the PRCB if
necessary (p/n 57AA-902 1J). Perform drum peculiarity adjustments.

[Bricorley]

usually new thermistors will fix the warming up issue