Konica Minolta C6500 - colors problem….

[zmeutz]

Hi!

anyone had this problem before?
I don’t understand from where it starts…

seems that magenta and other colors stops then it put only yellow


I tried , gamma adjustments, laser initial position , drum unit position , color registration,
changed drum orders… but same…


thanks!
stefan

[Synthohol]

on a halftone internal pattern, does the laser consistently write to the end of the page?

[lartis.aineias]

Go to process adjustment and touch the factory default!
if you are lucky the problem will disappear!

Στάλθηκε από το AC2003 μου χρησιμοποιώντας Tapatalk

[zmeutz]

on a halftone internal pattern, does the laser consistently write to the end of the page?

from 10pages printed one it’s like in the picture…
if I print on 90gr paper I don’t have this problem…

[methogod]

first eleiminate the RIP.

test prints from the engine see if it does it.
then from the glass...

if issues are gone from engine, then RIP or cable is faulty.