Hello everybody A customer reports quality problems printing on black. He says that wavy print (see file)
In My opinion The Problem is the BK Development Group.
Do you have other ideas?SKMBT_C22021071912031.pdfSKMBT_C22021071912030.pdf
Hello everybody A customer reports quality problems printing on black. He says that wavy print (see file)
In My opinion The Problem is the BK Development Group.
Do you have other ideas?SKMBT_C22021071912031.pdfSKMBT_C22021071912030.pdf
needs a new black DV unit.
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
K developer unit almost developer empty.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
Black developing unit 100%.
I had the same issue. After replacing it everything was ok.
Just to add yet another +1 for the K dev unit. Make sure K drum isn't over life as well, replace if it is.
A Ricoh Service Tech for 7 year. A Konica Minolta Service Tech for 7 years. Now, KM service manager for 3 years.
My Ricoh knowledge is slowly dwindling away at this point. Many things have been lost to time...
thank you all
ok then I replace K dev unit
Also check the clutch of the dev unit K A0EDM20000
replaced Dev BK now everything works regularly
thank you all
Last edited by ferro10; 07-26-2021 at 04:55 PM.
Bookmarks