Page 2 of 2 FirstFirst 12
Results 11 to 18 of 18
  1. #11
    Senior Tech 250+ Posts Zesti's Avatar
    Join Date
    Jun 2009
    Posts
    260
    Rep Power
    27

    Re: Konica Minolta C284e firmware Installation problem

    Quote Originally Posted by Synthohol View Post
    Request to use SMB2.0 on this product series.
    DipSW to change support SMB versions for the SMB client functions.
    DipSW No.219 (bit 2)
    Software SW No.219 0x00: SMB1.0/2.0 are available. (default)
    Software SW No.219 0x04: Only SMB2.0 is available. <----------that has to be set and ntlm set to v2 as well. its in admin, network, smb, client settings and somewhere around there.
    im better at the screen than my burnt memory cells
    Synthol.... Not burnt memory cells...it should be consumed memory cells.... Be in good health..

  2. #12
    Service Manager 5,000+ Posts
    Konica Minolta C284e firmware Installation problem

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    6,195
    Rep Power
    141

    Re: Konica Minolta C284e firmware Installation problem

    Quote Originally Posted by Synthohol View Post
    the firmware you are trying to use is C224e C284e_C364e_A5C10Y0-F000-GDB-M1.exe right?
    The Latest Firmware is GDP-M1

    Firmware Readme C224e C284e C364e GDP-M1.pdf
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  3. #13
    Certified Konica Expert 2,500+ Posts
    Konica Minolta C284e firmware Installation problem

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    north jersey
    Posts
    3,459
    Rep Power
    121

    Re: Konica Minolta C284e firmware Installation problem

    The OP requested the correct firmware that specifically addressed the smb2.0 issue which I posted.
    I have no idea where you got that version from but it's not what was requested.
    Plus he was trying mono fw not color.
    Gdp fw is not the latest either
    G20-m1 is latest base and gqw-m1 is the latest special fw.
    Gdp is 5 fw's ago.
    We know a thing or two because we've seen a thing or two.

  4. #14
    Service Manager 5,000+ Posts
    Konica Minolta C284e firmware Installation problem

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    6,195
    Rep Power
    141

    Re: Konica Minolta C284e firmware Installation problem

    Quote Originally Posted by Synthohol View Post
    The OP requested the correct firmware that specifically addressed the smb2.0 issue which I posted.
    I have no idea where you got that version from but it's not what was requested.
    Plus he was trying mono fw not color.
    Gdp fw is not the latest either
    G20-m1 is latest base and gqw-m1 is the latest special fw.
    Gdp is 5 fw's ago.
    I just wanted to state that the Latest Firmware is GDP-M1


    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  5. #15
    Certified Konica Expert 2,500+ Posts
    Konica Minolta C284e firmware Installation problem

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    north jersey
    Posts
    3,459
    Rep Power
    121

    Re: Konica Minolta C284e firmware Installation problem

    Maybe across the great pond it is but gqw-m1 is the latest here in special fw.
    Gdp is 5 versions ago from 2020.
    We know a thing or two because we've seen a thing or two.

  6. #16
    Certified Konica Expert 2,500+ Posts
    Konica Minolta C284e firmware Installation problem

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    north jersey
    Posts
    3,459
    Rep Power
    121

    Re: Konica Minolta C284e firmware Installation problem

    This is what I see.
    Attached Images Attached Images
    We know a thing or two because we've seen a thing or two.

  7. #17
    Service Manager 5,000+ Posts
    Konica Minolta C284e firmware Installation problem

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    6,195
    Rep Power
    141

    Re: Konica Minolta C284e firmware Installation problem

    Quote Originally Posted by Synthohol View Post
    Maybe across the great pond it is but gqw-m1 is the latest here in special fw.
    Gdp is 5 versions ago from 2020.

    Yes this has topic been discussed here before.

    In the UK it's not called 'special firmware' simply an intermediate version before the mass production release.

    Screenshot 2021-07-28 190952.jpg
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  8. #18
    Technician ltdiniz's Avatar
    Join Date
    Mar 2021
    Location
    Brasil
    Posts
    14
    Rep Power
    2

    Re: Konica Minolta C284e firmware Installation problem

    [QUOTE = danbb; 1844490] Tenho tentado fazer com que um C284e receba um novo firmware e sempre encontro problemas. A corrente é G00-C8. Tentando fazer o flash GDB-M1 para resolver problemas com SMB1. O firmware SSD está em 6.03 atualmente, atualizado de 6.02. Eu tentei 4 drives flash diferentes, um de 1 gb, 2 gb, 4 gb e 8 gb, de vários fabricantes (literalmente, patriot e Sandisk). A máquina aceita 3 dessas unidades flash se eu tiver a atualização SSD nelas, mas se eu colocar os arquivos de atualização FW na raiz da unidade conforme as instruções, recebo um erro "esta é uma memória externa inválida". Tentei então usar o método de atualização do ISW, usando o arquivo em lote fornecido para criar um .tar e executando um servidor FTP. mas recebo um erro "falha ao obter informações do servidor de firmware" depois que o arquivo de firmware é baixado. Se eu tento baixar e instalar o firmware pela interface web, a máquina vai baixar a atualização, mostrar a nova versão como disponível, mas quando tenta instalar diz "arquivo não disponível no servidor de firmware". Posso verificar com o FileZilla se o arquivo foi realmente solicitado, baixado e se o cliente fechou a conexão depois que o download foi concluído em ambos os casos. Tentei reformatar o disco rígido e tive os mesmos problemas. Alguém aqui tem alguma ideia? Alguma razão para esta máquina não aceitar o novo firmware? [/ QUOTE] e que o cliente fechou a conexão após a conclusão do download em ambos os casos. Tentei reformatar o disco rígido e tive os mesmos problemas. Alguém aqui tem alguma ideia? Alguma razão para esta máquina não aceitar o novo firmware? [/ QUOTE] e que o cliente fechou a conexão após a conclusão do download em ambos os casos. Tentei reformatar o disco rígido e tive os mesmos problemas. Alguém aqui tem alguma ideia? Alguma razão para esta máquina não aceitar o novo firmware? [/ QUOTE]

    Hello my dear!!!
    Follow the attachments for help.
    When unzipping the FW in the root of the pendriver, it also puts a folder with this name FWSelect (empty) in the root of the pendriver and the rest of the files unzipped like this print in an example.
    I hope I helped the friend
    Attached Images Attached Images
    Attached Files Attached Files

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here