Thanks:
0
Likes:
0
Dislikes:
0
-
Konica di 550 c0f24
What do You think about that problem? I've tried to find AIDC Sensor (i should clean it), but i've got problem with finding it ... Trouble reset doesn't help...
can You help me? give some tips...
greetings
-
The aidc sensor is usually right under the middle of cleaning unit below the anti-spill/recovery mylar.. It least thats where it is on the old minolta's i've serviced b4!
Regards
A.
-
this is a common problem. when the machine has not been serviced in a while the toner will spill onto the aidc sensor. almost guranteed you find this out. take the drum unit. remove drum and you will most likely find a toner spill onto that aidc sensor. not the atdc sensor in the dv unit. give it a try
brent
-
Passing Duplication Xpert
1,000+ Posts
- Rep Power
- 45
With the age of the machine, it's likely the anti spill mylar on the cleaning section is fatigued and in need of replacement. Been there, done that, bought the t shirt.
-
-
Passing Duplication Xpert
1,000+ Posts
- Rep Power
- 45
No, it just means I've seen it before on several occasions.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks