Thanks:
0
Likes:
0
Dislikes:
0
-
Junior Member
- Rep Power
- 0
Konica c454e Firmware (the job has been deleted due to insufficient memory)
Hello,
I have problem with konica(the job has been deleted due to insufficient memory)
I want to upload firmware.
Could someone upload a link to the firmware or send me it in a private message?
Thx
MFP Controller: A5C10Y0-0100-G20-M1(00)
-
Re: Konica c454e Firmware (the job has been deleted due to insufficient memory)
Originally Posted by
chuyno
Hello,
I have problem with konica(the job has been deleted due to insufficient memory)
I want to upload firmware.
Could someone upload a link to the firmware or send me it in a private message?
Thx
MFP Controller: A5C10Y0-0100-G20-M1(00)
Happy to help with this firmware. You can contact us at the links below.
-
Re: Konica c454e Firmware (the job has been deleted due to insufficient memory)
Just access Technician mode and Enable Equipment HD if it is disabled.
After that it formats the physical and Logic HD that can solve your problem.
-
Re: Konica c454e Firmware (the job has been deleted due to insufficient memory)
Does it refer to scan jobs in combination with highly compressed compact pdf? In case it does: Turn off compact PDF and try again, you'll end up in this message pretty quickly if you try too many and/or complex originals. I got calls about this every now and then - I think there's also a bulletin available with some SP tweaks but can't recall any specifics, there's probably already a topic here @CTN
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks