i need schema how to make reset unity drum and develop
i need schema how to make reset unity drum and develop
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
D_NQ_NP_822877-MLB43425838559_092020-W.jpg
Possible way to make like in the picture
What machine model???
Whatever
You can just get aftermarket replacement chips.
Or replace the fuses on the chips.
Or make a reset tool where you can use glass fuses instead of the SMD fuses.
Plugs in like the tool in the picture.
Done all of the above with success.
The Fuse from a TN512 toner bottle is the same, you can desolder them and solder them on top of the used chip.
Whatever
For drum chips the fuse is between pin 1 and pin 3.
For developer chips the fuse is between pin 1 and 5.
Just trace them back to the front-side PCB.
Whatever
Bookmarks