Results 1 to 8 of 8
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Jun 2011
    Location
    Salisbury, MD
    Posts
    151
    Rep Power
    27

    Konica Minolta C368 Scan to SMB

    Hello,

    I am refurbing a number of Bizhub C368. After delivering a couple and trying to networking them I have found that when I try to add scan to file smb there is no place to enter the User ID or Password. On most of the machines the User ID and Password are there and I can set up the scanning. This lot came in with the hard drives removed and a number of settings changed. I am hoping I am just missing something in the admin or tech rep settings. Any help is greatly appreciated.

    Thank you

  2. #2
    Certified Konica Expert 2,500+ Posts
    Konica Minolta C368 Scan to SMB

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    North Jersey
    Posts
    4,943
    Rep Power
    216

    Re: Konica Minolta C368 Scan to SMB

    Yes, a HDD is required for smb scanning.
    We know a thing or two because we've seen a thing or two.
    Also don't ask me for files without a contributor badge.

  3. #3
    Senior Tech 100+ Posts
    Join Date
    Jun 2011
    Location
    Salisbury, MD
    Posts
    151
    Rep Power
    27

    Re: Konica Minolta C368 Scan to SMB

    Thank you for the reply. I reread my post and I forgot to mention that I installed new hard drives formatted them and everything seems to be working correctly. The issue is when using the web interface to enter an address and select smb scanning there is a not a box to enter the user name and password. The box for Host and file path is there. Any idea of where I need to tell the machine to turn on these boxes?

  4. #4
    Service Manager 5,000+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    7,101
    Rep Power
    346

    Re: Konica Minolta C368 Scan to SMB

    Quote Originally Posted by JVC View Post
    Thank you for the reply. I reread my post and I forgot to mention that I installed new hard drives formatted them and everything seems to be working correctly. The issue is when using the web interface to enter an address and select smb scanning there is a not a box to enter the user name and password. The box for Host and file path is there. Any idea of where I need to tell the machine to turn on these boxes?
    How did you format them?
    Last edited by tsbservice; 10-21-2021 at 09:42 PM.
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

    I don't reply to private messages from end users.

  5. #5
    Senior Tech 100+ Posts
    Join Date
    Jun 2011
    Location
    Salisbury, MD
    Posts
    151
    Rep Power
    27

    Re: Konica Minolta C368 Scan to SMB

    In service mode I performed first the physical and then the logical formatting. Then I loaded the animation guide.

    I just started working on an additional machine. When I went into store addresses and selected smb there were the 4 places Host Name, Path, User Name and Password. I installed a hard drive formatted it and then had to do a memory clear. After doing the memory clear the user name and password boxes disappeared. Doing the reset I must have turned something off. Any idea what I need to turn back on?

    Again Thank You in advance for any help.

  6. #6
    Certified Konica Expert 2,500+ Posts
    Konica Minolta C368 Scan to SMB

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    North Jersey
    Posts
    4,943
    Rep Power
    216

    Re: Konica Minolta C368 Scan to SMB

    i would try firmware then.
    We know a thing or two because we've seen a thing or two.
    Also don't ask me for files without a contributor badge.

  7. #7
    Senior Tech 100+ Posts
    Konica Minolta C368 Scan to SMB

    romario's Avatar
    Join Date
    Jun 2020
    Location
    ESPAŅA
    Posts
    142
    Rep Power
    10

    Re: Konica Minolta C368 Scan to SMB

    Quote Originally Posted by JVC View Post
    Hello,

    I am refurbing a number of Bizhub C368. After delivering a couple and trying to networking them I have found that when I try to add scan to file smb there is no place to enter the User ID or Password. On most of the machines the User ID and Password are there and I can set up the scanning. This lot came in with the hard drives removed and a number of settings changed. I am hoping I am just missing something in the admin or tech rep settings. Any help is greatly appreciated.

    Thank you

    I got a batch of copiers the same, without hdd, and that option did not appear, I started the factory options install hdd, format hdd and ready I could scan to smb



























    thanks






  8. #8
    The Wolf 2,500+ Posts mojorolla's Avatar
    Join Date
    Jan 2010
    Location
    Cleveland OH
    Posts
    2,512
    Rep Power
    125

    Re: Konica Minolta C368 Scan to SMB

    Service mode > System 2 > HDD, make sure it is set to installed.
    Format, firmware and animation guide


    Failing to plan is planning to fail!!!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here