Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1
    Trusted Tech 50+ Posts lartis.aineias's Avatar
    Join Date
    Dec 2020
    Location
    Thessaloniki
    Posts
    75
    Rep Power
    8

    Konica 1050 touch screen problem!

    Good evening, I have a very strange problem.
    The touch screen does not work on a konica 1050.
    I have changed 3 screens, the cable and the board and it still does not work.
    has such a problem happened to anyone else?

    thanks

    Στάλθηκε από το AC2003 μου χρησιμοποιώντας Tapatalk

  2. #2
    Service Manager 5,000+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    7,103
    Rep Power
    346

    Re: Konica 1050 touch screen problem!

    Maybe some blown ICP. Check their locations in service manual.
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

    I don't reply to private messages from end users.

  3. #3
    Senior Tech 100+ Posts
    Konica 1050 touch screen problem!

    raplma's Avatar
    Join Date
    Mar 2017
    Location
    UK: East Sussex
    Posts
    140
    Rep Power
    24

    Re: Konica 1050 touch screen problem!

    A suggestion on a work around - although you probably already know this - until you get the actual screen sorted.

    We have a c7000 that intermittently loses the function of it's touch screen panel and on one occasion the screen itself went weird.
    You can remote into the panel and therefore control all the functions available via the panel, and more in fact as if at the panel. All you need to do is to ensure that the IP address of the mac/pc you use to remote in on is listed under the management tab via the web access pages. Sorry this is rather vague, I'm at home so can't run through the exact method here. But I use this method to remotely control the touch panels of all our KM machines from my desk, because I mind three machines and sometimes am too lazy to get out my chair and go to the machine, especially when I've sent a job through CWS and forgotten to change the paper settings on the press after loading the paper and before sending the job through. It is slower this way as you have to wait in-between each click on a button for the page to refresh, but it works.

  4. #4
    Service Manager 5,000+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    7,103
    Rep Power
    346

    Re: Konica 1050 touch screen problem!

    Quote Originally Posted by raplma View Post
    A suggestion on a work around - although you probably already know this - until you get the actual screen sorted.

    We have a c7000 that intermittently loses the function of it's touch screen panel and on one occasion the screen itself went weird.
    You can remote into the panel and therefore control all the functions available via the panel, and more in fact as if at the panel. All you need to do is to ensure that the IP address of the mac/pc you use to remote in on is listed under the management tab via the web access pages. Sorry this is rather vague, I'm at home so can't run through the exact method here. But I use this method to remotely control the touch panels of all our KM machines from my desk, because I mind three machines and sometimes am too lazy to get out my chair and go to the machine, especially when I've sent a job through CWS and forgotten to change the paper settings on the press after loading the paper and before sending the job through. It is slower this way as you have to wait in-between each click on a button for the page to refresh, but it works.
    Good idea Mark. I like smart workarounds
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

    I don't reply to private messages from end users.

  5. #5
    Senior Tech 100+ Posts
    Konica 1050 touch screen problem!

    raplma's Avatar
    Join Date
    Mar 2017
    Location
    UK: East Sussex
    Posts
    140
    Rep Power
    24

    Re: Konica 1050 touch screen problem!

    In case anyone needs to do this, here is a method to gain web access to the "Remote Panel" to remotely view and control the screen and buttons of the machine:
    The method may vary slightly from model to model, but the theory should be similar, it is on all the machines we have had over the years.

    Remote into your machine: In your browser enter IP address of the printer - not the IP of the Fiery - "Web Utilities" screen will come up. "webtools' screen is the fiery
    Check access is permitted: Click/Select option called "Remote Panel" - You'll either see a remote version of your panel or "Access is denied (Unauthorised PC)" message
    To authorise MAC/PC: Click back page on browser, Click/Select "Machine Manager Settings", enter the username (admin) and password
    - this password is the "administrator authentication password" not the service mode password
    - the one you enter when you access [Utility/Counter] ---> Administrator Settings
    Select/click "Remote Panel Setting / Job History Setting"
    Enter MAC/PC IP address in one of the "IP Address for access permission" fields - in case you don't know your PC IP, it is usually shown below these fields
    To save entry click "Registration" button usually below all the fields, then click "Main Page" to take you back to the original menu
    Click/Select "Remote Panel" - you can now acess all touch panel and pad functions - the image below is what our c7000 panel looks like on my mac & PC
    Remote Panel c7000.jpg

  6. #6
    Field Supervisor 500+ Posts
    Join Date
    Dec 2009
    Posts
    678
    Rep Power
    60

    Re: Konica 1050 touch screen problem!

    Can you enter SM this way?

  7. #7
    Senior Tech 100+ Posts
    Konica 1050 touch screen problem!

    raplma's Avatar
    Join Date
    Mar 2017
    Location
    UK: East Sussex
    Posts
    140
    Rep Power
    24

    Re: Konica 1050 touch screen problem!

    Yes
    It's a bit clunky but yes you can, exactly the same as on the machone itself.
    All you have to do is find where on the web version they have placed all the equivalent buttons, lets just say it's not logical.
    So, on the image I posted before, The [Utility/Counter] button is at the top of the screen, you then enter the usual SM password by clicking in the relevant button images on the right.
    The key aspect to note is that you must let the webpage refresh (it does automatically) before you click the next required button, you'll also hear your machine acknowledge the button press as it would if you were to press a button on the machine itself - assuming the "bleeps" are turned on.
    Mark

  8. #8
    Master Of The Obvious 10,000+ Posts
    Konica 1050 touch screen problem!

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,444
    Rep Power
    462

    Re: Konica 1050 touch screen problem!

    Thanks Mark!. This will be handy. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  9. #9
    Senior Tech 100+ Posts
    Konica 1050 touch screen problem!

    raplma's Avatar
    Join Date
    Mar 2017
    Location
    UK: East Sussex
    Posts
    140
    Rep Power
    24

    Re: Konica 1050 touch screen problem!

    One point to fill out a little more is regarding the refreshing of the webpage when using the remote panel.
    The webpage only refreshes after you have selected an option, clicked a button.
    So if you are running a process or even a job and using the webpage to monitor what is going on, you will need to manually refresh the webpage, press F5 etc.
    What I sometimes do when I want continuous monitoring is to turn on my web browsers auto refresh function for say every 5 seconds or something, depending on what monitoring I'm doing.

  10. #10
    Master Of The Obvious 10,000+ Posts
    Konica 1050 touch screen problem!

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,444
    Rep Power
    462

    Re: Konica 1050 touch screen problem!

    Keep going. I'm absorbing it all. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here