Thanks: 
Likes: Really good question but the answer as far as I know atm is No.Originally Posted by cyta123
Did you tried reset and format?
Dislikes: 0
Really good question but the answer as far as I know atm is No.
Did you tried reset and format?
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
I tried but I didn't get it
J formated ssd memory and updated firmware - no effect.
First apeared c-164 and then go into self-diagnostic, later machine are frozen.
Last edited by cyta123; 12-28-2021 at 05:13 PM.
Dont go above G4 or J9
Do you think it is a good idea to use a reset tools a789be?
you can try but it may have been corrupted. just like the 8 series give it time to work once you turn it back on. see if it will give recover data
No "recover data" apeared.
Hi, i have C250Iwith boot hang on 25%. Tried the test firmware, normal firmware (different versions that i had) and no reaction (the USB was good, worked on other machines).
I did a reball on CPU board and it started reacting on the firmware, did the etst (all OK, CPU, SSD OK), so i did the firmware. It started booting up but gives C-C164 error (machine code was set to 10 D according to S/N and info You supplied) still a no go.
Can You supply a reset tool and proper firmware? Would be grateful.
try running the GXX repair/diag firmware.
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
Did that, tested everything OK, did the recover, told me to do the FW, after FW still C-C164
Reply With Quote
Bookmarks