Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 31
  1. #11
    Technician
    Join Date
    Sep 2021
    Location
    DES PLAINES
    Posts
    13
    Rep Power
    1

    Re: Konica Minolta c6100 Jam??

    So I solved this situation, now I am getting a new error Code C-5109?

  2. #12
    Certified Konica Expert 2,500+ Posts
    Konica Minolta c6100 Jam??

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    north jersey
    Posts
    3,639
    Rep Power
    133

    Re: Konica Minolta c6100 Jam??

    Code
    C-5109
    Classification
    PF-707m, PF-711: Centering sensor abnormality
    Cause
    The centering sensor (PS40) of PF fails to detect the paper for more than specified time.
    Measures to take when alert occurs
    The main body and the option stop immediately.
    Estimated abnormal parts
    PFU drive board (PFUDB)
    Centering sensor (PS40)
    Correction
    Note
    ▪ The message "Please call service" is displayed on the panel.
    Solution
    1. Prior confirmation
    Check that the centering sensor (PS40) is installed correctly.
    2. Execute the IO Check (18-01) of the centering sensor (PS40) when A3 papers are in the center of paper path in the horizontal conveyance
    section.
    3. When the result of the IO Check in the step 2 is normal, PS40 is not abnormal. Go on to step 5.
    For details of IO check results, refer to "Table 1: Result check."
    4. Check the connector connections, CN118 of PFUDB, CN432 (relay connector), CN433 (relay connector), CN437 (relay connector), CN410
    of PS40, and the wiring between PFUDB and PS40. Then, repair it when there is any abnormality.
    5. Replace PS40.
    6. Replace PFUDB.
    Table 1: Result check
    Result check Normal Abnormal
    START About 4500 65535
    Deviate from "normal" significantly
    STOP About 4500 65535
    Deviate from "normal" significantly
    Faulty part isolation DIPSW
    Control while detached
    We know a thing or two because we've seen a thing or two.
    Also don't ask me for files without a contributor badge.

  3. #13
    Technician
    Join Date
    Sep 2021
    Location
    DES PLAINES
    Posts
    13
    Rep Power
    1

    Re: Konica Minolta c6100 Jam??

    Quote Originally Posted by Synthohol View Post
    Code
    C-5109
    Classification
    PF-707m, PF-711: Centering sensor abnormality
    Cause
    The centering sensor (PS40) of PF fails to detect the paper for more than specified time.
    Measures to take when alert occurs
    The main body and the option stop immediately.
    Estimated abnormal parts
    PFU drive board (PFUDB)
    Centering sensor (PS40)
    Correction
    Note
    ▪ The message "Please call service" is displayed on the panel.
    Solution
    1. Prior confirmation
    Check that the centering sensor (PS40) is installed correctly.
    2. Execute the IO Check (18-01) of the centering sensor (PS40) when A3 papers are in the center of paper path in the horizontal conveyance
    section.
    3. When the result of the IO Check in the step 2 is normal, PS40 is not abnormal. Go on to step 5.
    For details of IO check results, refer to "Table 1: Result check."
    4. Check the connector connections, CN118 of PFUDB, CN432 (relay connector), CN433 (relay connector), CN437 (relay connector), CN410
    of PS40, and the wiring between PFUDB and PS40. Then, repair it when there is any abnormality.
    5. Replace PS40.
    6. Replace PFUDB.
    Table 1: Result check
    Result check Normal Abnormal
    START About 4500 65535
    Deviate from "normal" significantly
    STOP About 4500 65535
    Deviate from "normal" significantly
    Faulty part isolation DIPSW
    Control while detached
    I got 65535 does that mean the sensor is bad??

  4. #14
    Certified Konica Expert 2,500+ Posts
    Konica Minolta c6100 Jam??

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    north jersey
    Posts
    3,639
    Rep Power
    133

    Re: Konica Minolta c6100 Jam??

    significantly
    We know a thing or two because we've seen a thing or two.
    Also don't ask me for files without a contributor badge.

  5. #15
    Master Of The Obvious 10,000+ Posts
    Konica Minolta c6100 Jam??

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    20,239
    Rep Power
    398

    Re: Konica Minolta c6100 Jam??

    Does it even have a centering sensor? I doubt it.

    I seem to recall that the centering sensor assembly must be installed when the PF707m is used on a C6100.
    =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  6. #16
    Senior Tech 100+ Posts
    Join Date
    Feb 2017
    Location
    Chicago, IL
    Posts
    126
    Rep Power
    12

    Re: Konica Minolta c6100 Jam??

    Quote Originally Posted by blackcat4866 View Post
    Does it even have a centering sensor? I doubt it.

    I seem to recall that the centering sensor assembly must be installed when the PF707m is used on a C6100.
    =^..^=
    What does the centering sensor do?

  7. #17
    Master Of The Obvious 10,000+ Posts
    Konica Minolta c6100 Jam??

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    20,239
    Rep Power
    398

    Re: Konica Minolta c6100 Jam??

    They should have come " ... bundled with the main body." As it says right here. Did you install them?:

    PF-707
    =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  8. #18
    Senior Tech 100+ Posts
    Join Date
    Feb 2017
    Location
    Chicago, IL
    Posts
    126
    Rep Power
    12

    Re: Konica Minolta c6100 Jam??

    Quote Originally Posted by blackcat4866 View Post
    They should have come " ... bundled with the main body." As it says right here. Did you install them?:

    PF-707
    =^..^=
    It wasn't inside my PF-707m and I bought it brand new.

  9. #19
    Master Of The Obvious 10,000+ Posts
    Konica Minolta c6100 Jam??

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    20,239
    Rep Power
    398

    Re: Konica Minolta c6100 Jam??

    So there isn't one. I think I know what the problem is. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  10. #20
    Technician
    Join Date
    Sep 2021
    Location
    DES PLAINES
    Posts
    13
    Rep Power
    1

    Re: Konica Minolta c6100 Jam??

    Quote Originally Posted by blackcat4866 View Post
    The C-0130 is a PF-707m roller pressure release abnormality.

    With larger media, rather than maintaining a buckle between the rollers of the paper pickup unit, this paper feeder releases the pinch roller pressure to allow the media to pull through.

    I had this erro on a bizhub C1060:

    "C0130" error message, with PF-707, won't clear.

    Roller pressure release motor M10 cannot reach home position. Clean roller pressure release sensor PS41 (was heavily caked with translucent grease). When cleaned, machine comes to ready. It feeds a few sheets before coding out with loud gear noise. The 2nd tooth from the flat on sector gear 36T is worn/flattened.

    Clean roller pressure release sensor PS41 in a cup of alcohol. Replace release cam (A55C 7137 00), and release sector gear 36T (A55C 7195 00).

    what if there is we no noise of the gears grinding or the gears are fine could it be the motor gone bad?.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here