Page 1 of 4 1234 LastLast
Results 1 to 10 of 31
  1. #1
    Technician
    Join Date
    Sep 2021
    Location
    DES PLAINES
    Posts
    13
    Rep Power
    1

    Konica Minolta c6100 Jam??

    Hey Guys,

    My Minolta C6100 is getting paper Jams at the M3 section, its not getting past that section, is there a solution for this, I got an error code of C-0130 when doing the paperless run test.

  2. #2
    Master Of The Obvious 10,000+ Posts
    Konica Minolta c6100 Jam??

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    20,239
    Rep Power
    398

    Re: Konica Minolta c6100 Jam??

    What jam code? =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    Technician
    Join Date
    Sep 2021
    Location
    DES PLAINES
    Posts
    13
    Rep Power
    1

    Re: Konica Minolta c6100 Jam??

    Quote Originally Posted by blackcat4866 View Post
    What jam code? =^..^=
    The Code I got is C-0130

  4. #4
    Master Of The Obvious 10,000+ Posts
    Konica Minolta c6100 Jam??

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    20,239
    Rep Power
    398

    Re: Konica Minolta c6100 Jam??

    The C-0130 is a PF-707m roller pressure release abnormality.

    With larger media, rather than maintaining a buckle between the rollers of the paper pickup unit, this paper feeder releases the pinch roller pressure to allow the media to pull through.

    I had this erro on a bizhub C1060:

    "C0130" error message, with PF-707, won't clear.

    Roller pressure release motor M10 cannot reach home position. Clean roller pressure release sensor PS41 (was heavily caked with translucent grease). When cleaned, machine comes to ready. It feeds a few sheets before coding out with loud gear noise. The 2nd tooth from the flat on sector gear 36T is worn/flattened.

    Clean roller pressure release sensor PS41 in a cup of alcohol. Replace release cam (A55C 7137 00), and release sector gear 36T (A55C 7195 00).
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  5. #5
    Technician
    Join Date
    Sep 2021
    Location
    DES PLAINES
    Posts
    13
    Rep Power
    1

    Re: Konica Minolta c6100 Jam??

    Quote Originally Posted by blackcat4866 View Post
    The C-0130 is a PF-707m roller pressure release abnormality.

    With larger media, rather than maintaining a buckle between the rollers of the paper pickup unit, this paper feeder releases the pinch roller pressure to allow the media to pull through.

    I had this erro on a bizhub C1060:


    "C0130" error message, with PF-707, won't clear.

    Roller pressure release motor M10 cannot reach home position. Clean roller pressure release sensor PS41 (was heavily caked with translucent grease). When cleaned, machine comes to ready. It feeds a few sheets before coding out with loud gear noise. The 2nd tooth from the flat on sector gear 36T is worn/flattened.

    Clean roller pressure release sensor PS41 in a cup of alcohol. Replace release cam (A55C 7137 00), and release sector gear 36T (A55C 7195 00).
    Is There some diagram or pictures of what I should look for?

  6. #6
    Master Of The Obvious 10,000+ Posts
    Konica Minolta c6100 Jam??

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    20,239
    Rep Power
    398

    Re: Konica Minolta c6100 Jam??

    Respectfully, you might take a look at the service manual. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  7. #7
    Service Manager 5,000+ Posts
    Konica Minolta c6100 Jam??

    BillyCarpenter's Avatar
    Join Date
    Aug 2020
    Location
    Long Beach, Mississippi
    Posts
    7,752
    Rep Power
    270

    Re: Konica Minolta c6100 Jam??

    Quote Originally Posted by blackcat4866 View Post
    The C-0130 is a PF-707m roller pressure release abnormality.

    With larger media, rather than maintaining a buckle between the rollers of the paper pickup unit, this paper feeder releases the pinch roller pressure to allow the media to pull through.

    I had this erro on a bizhub C1060:

    "C0130" error message, with PF-707, won't clear.

    Roller pressure release motor M10 cannot reach home position. Clean roller pressure release sensor PS41 (was heavily caked with translucent grease). When cleaned, machine comes to ready. It feeds a few sheets before coding out with loud gear noise. The 2nd tooth from the flat on sector gear 36T is worn/flattened.

    Clean roller pressure release sensor PS41 in a cup of alcohol. Replace release cam (A55C 7137 00), and release sector gear 36T (A55C 7195 00).

    I bow before thee.
    Embrace the process, not the outcome.

  8. #8
    Technician
    Join Date
    Sep 2021
    Location
    DES PLAINES
    Posts
    13
    Rep Power
    1

    Re: Konica Minolta c6100 Jam??

    Quote Originally Posted by blackcat4866 View Post
    Respectfully, you might take a look at the service manual. =^..^=
    One more quick question if the machine isn't leveled correct? can i get a paperjam?, or that has nothing to do with it?

  9. #9
    Master Of The Obvious 10,000+ Posts
    Konica Minolta c6100 Jam??

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    20,239
    Rep Power
    398

    Re: Konica Minolta c6100 Jam??

    Quote Originally Posted by dkaliahsan View Post
    One more quick question if the machine isn't leveled correct? can i get a paperjam?, or that has nothing to do with it?
    It's unrelated to leveling. It's a simple mechanical issue that you won't see until you do some disassembly.
    And the C-0130 is and error code, not a jam code. There is a difference. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  10. #10
    Field Supervisor 500+ Posts
    Join Date
    Dec 2009
    Posts
    512
    Rep Power
    51

    Re: Konica Minolta c6100 Jam??

    Judging by level of your questions i think it will be the best for you to call some technician who knows what he is doing.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here