Dislikes: 0
Hy engineers,
I have konica c454, has faint copies than it was previously printing dark copies. Toner used same as previous, drums and all imaging units good as before👉 mileage still low. Laser unit cleaned OK. But slightly improved after cleaning laser. What could be problem rather than high voltage board. Any calibration to increase dark copy and printout? Especially black and white prints.
Post CMYK halftone patterns at 255 and 128 density. Clean IDC sensors, clean drum coronas and make Stabilization and gradations.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
ive also see faint prints when someone zeros the t-belt or t-roller without replacing it.
just wanted to add that for future reference
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
Great point.Originally Posted by Synthohol
ive also see faint prints when someone zeros the t-belt or t-roller without replacing it.
just wanted to add that for future reference
Sent from my SM-G960U using Tapatalk
Thanks: 
Likes: 
Reply With Quote
Bookmarks