Dislikes: 0
I have the files on the flash drive correctly and following the instructions, but the machine won't load the files. The machine can see the files so I know the drive and port are working. I did turn off the security settings to allow the firmware to be loaded. Am I missing something? Any suggestions are welcome. Thanks in advance
copyguy69
This may sound silly but you are holding
Down the yellow button with the red dot while turning on the machine right?
If not, there ya go
And the stick only has the folder FW0000xx on it right?
Drive is 8gb or smaller right?
Sometimes it's just the little things.
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
Totally agree, one note... works with 32GB thumb drive without problem on new i-series.Originally Posted by Synthohol
This may sound silly but you are holding
Down the yellow button with the red dot while turning on the machine right?
If not, there ya go
And the stick only has the folder FW0000xx on it right?
Drive is 8gb or smaller right?
Sometimes it's just the little things.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
As Synthohol said but we have found sometimes it may take a few attempts to accept the FW. Usually a reboot & try again it will work.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Thanks: 
Likes: 
Reply With Quote
Bookmarks