HAVING A HARD TIME PAYING 150% of what I should be paying for toner...
anyone have a source for OEM, TN619 and TN612 - or aftermarket they would use?
never used aftermarket toner in a Konica in 20 years....
HAVING A HARD TIME PAYING 150% of what I should be paying for toner...
anyone have a source for OEM, TN619 and TN612 - or aftermarket they would use?
never used aftermarket toner in a Konica in 20 years....
i have 3 sets of tn612 + extra yellow 13 btls on ebay now about $53 a btl all oem free shipping
13 btls of konica minolta C6501 C5501 toner 3 sets of toner YMCK + extra yellow | eBay
I work for KM and we can't even get any. Between supply chain issues and the factory exploding, we might not get any until the new year.
Tip for the day; Treat every problem as your dog would.....If you cant eat it or f*ck it....then p*ss on it & walk away...
toner like any other commodity you want to buy low sell high, but in my case i was able to buy this toner $25 a btl from a mom and pop print shop who serviced and supplied their own machines . unfortunately they had to shutdown and sell off equipment and supplies i sold the btls at $53 or less way below market rate not gouging anyone , now some other mom and pop with an older model got toner at a reasonable price every one was happy
In Europe, stocks are not yet full. Sometimes orders have arrived.
Katun colors in use. There are also problems with availability.
I was forced to get an aftermarket cyan for a c654--that stupid thing caused a nasty cyan shadow not long after install...cleared up after OEM swap
Just got it today, black, yellow and cyan, no magenta.
And yes, half bottles for now.
I was very happy to see delivery guy.
We're using nothing but C/L and I only use that abbreviation for those not in the biz... They sell to the trade only.
Exclusively using their Bizhub toners for several years now on all 4e's and 8's up to 65 ppm.
Going through a few hundred cases a year with no problem. No fusing, overtoning, copy q., no problems.
Never sold or serviced the faster models you are referring to. Fastest we do are the BH658... Hundreds under contract. No problems.
We stick with almost all OEM drums though.
I think anyone having a problem would be transitioning from one aftermarket brand to another brand or from/to OEM. We've seen the "Amaz... ing" "Done it Wiser" toners contaminate perfectly good BH prev. running all OEM consumables. $1500 later,... yeah.
If you can commit to running C/L toner exclusively, you should be fine.
Bookmarks