Results 1 to 8 of 8
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Jul 2014
    Location
    USA
    Posts
    204
    Rep Power
    23

    BH 1100 Slow Printing

    They have 2 machines. Only one is messing up. Does it with crossover from my laptop as well. It is slow to print and takes about 30 seconds to pull up the printer preferences. Web Interface is also inaccessible.
    Heres what Ive tried: NVRAM rewrite, FW Update(ver 90), Format Controller HDD and 3 different print drivers.

    Any ideas before I replace Controller Board?

  2. #2
    IT Manager 10,000+ Posts bsm2's Avatar
    Join Date
    Feb 2008
    Location
    Biden 2024
    Posts
    25,769
    Rep Power
    333

    Re: BH 1100 Slow Printing

    did you try a data clear?
    and reset the nic

  3. #3
    Senior Tech 100+ Posts
    Join Date
    Jul 2014
    Location
    USA
    Posts
    204
    Rep Power
    23

    Re: BH 1100 Slow Printing

    There arent initialization settings on an 1100 like there are on the office devices. I did the controller hdd format which wipes the network settings though.

  4. #4
    IT Manager 10,000+ Posts bsm2's Avatar
    Join Date
    Feb 2008
    Location
    Biden 2024
    Posts
    25,769
    Rep Power
    333

    Re: BH 1100 Slow Printing

    Quote Originally Posted by splblazer91 View Post
    There arent initialization settings on an 1100 like there are on the office devices. I did the controller hdd format which wipes the network settings though.
    try replacing the hhd

  5. #5
    Service Manager 10,000+ Posts
    BH 1100 Slow Printing

    BillyCarpenter's Avatar
    Join Date
    Aug 2020
    Location
    Long Beach, Mississippi
    Posts
    13,375
    Rep Power
    448

    Re: BH 1100 Slow Printing

    Before you replace anything, I would check to make sure that you LAN Interface speed is set to AUTO or whatever setting matches your network...which is most likely Gigabit.
    Growth is found only in adversity.

  6. #6
    Senior Tech 100+ Posts
    Join Date
    Jul 2014
    Location
    USA
    Posts
    204
    Rep Power
    23

    Re: BH 1100 Slow Printing

    FIXED!
    Replaced Controller today with no luck. Tech Support was no help so I started searching KB Articles. Found one for the 8 series. It had me go into the driver and turn off auto obtain settings.(Bi-directional communication) This resolved my problem.

  7. #7
    Service Manager 5,000+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    7,103
    Rep Power
    346

    Re: BH 1100 Slow Printing

    Quote Originally Posted by splblazer91 View Post
    FIXED!
    Replaced Controller today with no luck. Tech Support was no help so I started searching KB Articles. Found one for the 8 series. It had me go into the driver and turn off auto obtain settings.(Bi-directional communication) This resolved my problem.
    Good find splblazer91! Really shows you the idea behind "better measure twice before cut"
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

    I don't reply to private messages from end users.

  8. #8
    Master Of The Obvious 10,000+ Posts
    BH 1100 Slow Printing

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Re: BH 1100 Slow Printing

    Quote Originally Posted by splblazer91 View Post
    FIXED!
    Replaced Controller today with no luck. Tech Support was no help so I started searching KB Articles. Found one for the 8 series. It had me go into the driver and turn off auto obtain settings.(Bi-directional communication) This resolved my problem.
    Thanks for sharing! =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here