Thanks: 
Likes: 
Dislikes: Elatec Card Reader: TWN4 MultiTech 2
I think I need a configuration tool for ldd. Let me configure to right VID/PID.
But I can't find this tool on KM site, where can I get it? or someone can provide it to me.
Thank you very much!
C364e with Elatec Card Reader
Elatec Card Reader: TWN4 MultiTech 2
I think I need a configuration tool for ldd. Let me configure to right VID/PID.
But I can't find this tool on KM site, where can I get it? or someone can provide it to me.
Thank you very much!
Last edited by Mickey1997; 12-02-2021 at 10:19 AM. Reason: whrong language
I think you are out of luck, KM did not offer the LDD for anything older than the 8 series for the Elatec card reader..Version A61F0Y0-A030-G99-01 is the AU-205H LDD that you might be able to use the tool with, but I have no idea if it will work.
Thanks a lot ! Elatec may not be used directly on c364e .Originally Posted by emujo2
Now I tried Network card reader(Elatec TCPConvert 2) ,and still not working.
It is still trying, Did anyone has experience in this part?
Can give me some suggestions? Thanks for help!
According to DLEU1703527EN there is a working driver for (at least some) Elatec readers.
Driver, tools and docs in link below:
https://we.tl/t-YAvpym80Rw
Link will be available for one week.
Thank you very much for your help,I think it will be useful !
I will research and try it again.
Best Regards
Hi jotunn,
I wonder if you could help? I think I'm looking for the same files you have linked to in the past.
Trying to get a Konica Minolta bizhub C250i/C300i/C360i Series device to use either a RF IDeas RDR-80581AKU or Elatec TWN4 MultiTech card readers.
From what I can see I need the Keyboard Emulation Configuration Tool. and the Keyboard Emulation LDD. I have the LDD/Driver file "LDD_IT6_AA2J0Y0-A031-G00-30_KeyboardEmu.exe" that extracts out the "ICC_LDR.tar" with Keyboard Emulation for the standard AU-205H, and not the card readers I have.
But think I still need "ConfigurationToolforKeyboardEmulationLDD.exe" to be able to set correct Vendor ID & Product ID for RF IDeas or Elatec card readers.
Any ideas where I might find the missing tool?
if you go online to look at the RD-80581AKU, you'll see it doesn't work with KM MFPs
WAVE ID Plus Keystroke V2 Black USB Reader
Brand: RF IDeas
Mfr Part # RDR-80581AKU
WAVE ID Plus keystroke V2 black USB reader with dual frequency. This model supports most MFP brands except Konica Minolta.
Tip for the day; Treat every problem as your dog would.....If you cant eat it or f*ck it....then p*ss on it & walk away...
the AKU readers work on every model so far, just have to use PCProx to configure the correct pid or some shit.
the app saves it as the tar file you load into the machine.
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
Thank you very much for your help,I think it will be useful !
I will research and try it again.thanks
Best Regards
[引用=佐敦;2041353]根据DLEU1703527EN，（至少一些）Eratec读者有一个工作驱动程序。
驱动程序、工具和文档在下面的链接中：
https://we.tl/t-YAvpym80Rw
链接将提供一周。[/引用]
兄弟，我也看到了文档，但我无法下载文档中的驱动程序和固件。你能帮忙吗？
Reply With Quote
Bookmarks