BH-C-3110, airprint

**Hansoon** · 01-09-2022

Anyone please have the settings needed for the BH-C-3110 to enable Airprint?
Any soft switches to set, any special firmware?

Hans

**Synthohol** · 01-09-2022

AirPrint (Bonjour) setting is disabled

Solution
CAUSE: Firmware requires updating

SOLUTION: Install the following firmware based on the model. The latest version of firmware, system software or drivers is available via One Stop Product Support.

bizhub C3110; A6DT30GJD01-951
bizhub C3100P: A6DR30GJD01-951
bizhub C3850/3350/3850FS; A3GN30GJ8C3-W51

Problem
AirPrint setting becomes invalid after updating to SMB 2.0 compatible firmware (G0C02-9AV to GGD01-950)

Solution
CAUSE: Firmware requires updating.

SOLUTION: Install controller version A6DT30GJD01-951. The latest version firmware is available for download via One Stop Product Support.
Note: Please install in the following order.

Controller Firmware File name [subA6DT30G0D00-899.prn]
Controller Firmware File name [mainA6DT30GJD01-951.prn].

For additional information please refer to DLKM_BT1929980EN.

Technical Notes
1. AirPrint setting becomes invalid after updating to SMB2.0 compatible firmware (G0C02-9AV to GGD01-950).
a) When updating from firmware that does not support SMB2.0, relocate the nonvolatile area to support SMB2.0.
b) Do not relocate the non-volatile area when updating from SMB2.0 support firmware.
c) What to do if you have already updated to SMB2.0 support firmware.
(1) Set “32” to SoftSW No.280.
(2) Display the item “Specific Area of Network settings” for initializing the nonvolatile area
in the PSWC administrator mode (system-> maintenance).
(3) Press the “Specific Area of Network settings” clear button
and then press the OK key to initialize the non-volatile area and restart the unit automatically.
(4) Set SoftSW No.280 to “0” and hide “Specific Area of Network settings” of PSWC.
* This function is used only by CE.

and for those interested on what machine is capable of what...