Bizhub c220 replaced drums with new units, magenta warning still on

[va2ir]

Good day. I am now the owner of my bizhub 220. It works well for me. I just replaces the 4 drums with new units. Restarted the machine and the magenta drum warning still comes on. I swapped the cyan with the mag unit, and the mag warning is still on. Image is fine. Ran some solid pages, coverage is perfect. Any ideas? Also, the clutch motor for the manual feed tray stopped working. Any idea where these can be purchased? Thanks

[Phil B.]

Good day. I am now the owner of my bizhub 220. It works well for me. I just replaces the 4 drums with new units. Restarted the machine and the magenta drum warning still comes on. I swapped the cyan with the mag unit, and the mag warning is still on. Image is fine. Ran some solid pages, coverage is perfect. Any ideas? Also, the clutch motor for the manual feed tray stopped working. Any idea where these can be purchased? Thanks

Would be helpful if we knew where you are located so we can give you help.

Sent from my SM-G960U using Tapatalk

[Phil B.]

Would be helpful if we knew where you are located so we can give you help.

Sent from my SM-G960U using Tapatalk

And private messaging me doesn't do one damn bit of good!
Post your location PUBLICLY!

Sent from my SM-G960U using Tapatalk

[Phil B.]

New?

GENUINE OEM or turd party parts?

OEM toners?

Sent from my SM-G960U using Tapatalk

[Synthohol]

Not to be a dick but why a c220? It's an old boat anchor!
Check the 3 gold pins that touch the drum chip. Prolly not resetting.
We're they OEM new drums or did you just replace the cylinder and blade?
The chip is what seems to not reset the warning.
With a due respect you should have walked away from that dinosaur.

[copier tech]

Good day. I am now the owner of my bizhub 220. It works well for me. I just replaces the 4 drums with new units. Restarted the machine and the magenta drum warning still comes on. I swapped the cyan with the mag unit, and the mag warning is still on. Image is fine. Ran some solid pages, coverage is perfect. Any ideas? Also, the clutch motor for the manual feed tray stopped working. Any idea where these can be purchased? Thanks

If you update the firmware & change a couple of SW in CE mode you can disable this warning & no need to fit new drums.

[va2ir]

All fixed. Thanks for all the help. Working fine now.

[copyman]

All fixed. Thanks for all the help. Working fine now.

What was the fix?

Doesn't happen very often but I've had a few bad chips with OEM supplies.

[Phil B.]

All fixed. Thanks for all the help. Working fine now.

Well share with the class..
What fixed it?

Sent from my SM-G960U using Tapatalk

[copier tech]

Well share with the class..
What fixed it?

Sent from my SM-G960U using Tapatalk

Not that most of us will see a C220 again but helpful for techs in the 3rd world etc.