I would conduct Self-diagnostic (if it still fails to load with front door open).
Procedure (using SERVICE MODE menu)
1. Call the Service Mode to the screen.
2. Touch these keys in this order: [State Confirmation] g [Self-diagnostic] g [Check All].
3. Press the Start key to start the check procedure.
4. When the check procedure is completed, the results are shown on the screen. If any of the check results are NG, take measures upon confirmation of the corruption details mentioned above and Next action.
Note: Press the Stop key to interrupt the check sequence.
Procedure (using main power switch)
1. Open the front door.
2. Turn the main power switch ON while pressing the power key. After a short beep sound is made once, release the power key and close the front door. Wait to display the self-diagnosis (full check) screen.
3. After displaying the self-diagnosis screen, press the start key. The self-diagnosis (full check) is started. The result of the diagnosis is displayed for every item. (OK/NG)
4. After finishing the diagnosis for all items, turn the main power switch OFF.
5. If there is an item displaying NG, investigate the NG item and take countermeasures.
P.S.
I feel you're on wrong way and BC is most helpful/humble person on this site. Take care.
Bookmarks