Dislikes: 0
has anyone ever seen any the attached error before? It happens randomly throughout the day and will go if power is cycled. The firmware is up to M1. Have checked all the connection to the FSB and seemed okay. I'm thinking of going back with an FSB off a scrap machine but if anyone could shed some light on it that would be great thanks.
Originally Posted by joelea
Yes I agree try another front side board.
Also check there isn't a load of stray toner in that area especially on or around the FSB.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Cra.py pictures but I guess it's is giving "Yellow drum installation error" message.
Had one C258 same situation but very intermittent may be bad drum lock lever or wiring harness never find.
Had C250i doing same 2-3 times in a row. Make sure drum is tightly locked and didn't hear them more than year.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
it's says all drums and all devs installation error
Then FSB or controller board.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
Thanks: 
Likes: 
Reply With Quote
Bookmarks