Thanks: 0
Dislikes: 0
Hi,
One customer has 5020i which printed 14K.
Few days ago they called replace drum message displayed, I checked that life and 43% remaining, restarted machine and it worked fine.
This day they called again this same issue, I tried to reset the life to 100% and it can be printed again.
What the reason about that? Thanks a lot.
Maybe Firmware anomaly, try latest.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
perhaps something is wrong with the drum chip or the contactsOriginally Posted by jwai
perhaps something is wrong with the drum chip or the contacts
No drum chip on this model.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
Are you shure that's the right allert message? Do you have seen this with your own eyes?
14k is near to the factory toner capacity (12k i guess) sometime customers can't read the exactly alert message.
This brother device count from 0 to the end 50'000 after you got the alert otherwise it must be a firmware bug..
I have a few in the field but until today i have not seen such behavior.
Yes, I saw myself. First visit the machine displayed replace drum alert, I restarted and OK。
Second visit when I got a test print it displayed again after data had been received。
This day I had a visit and cleaned contacts of drum unit and machine side, let's a test。
True, this is the brother engine
I know brother can display a "clean drum" message if they detect a HV leakage from the charge corona - using the charge wire cleaner won't hurt
I have hundreds of these Brothers in field and never seen this message prematurely.True, this is the brother engine
I know brother can display a "clean drum" message if they detect a HV leakage from the charge corona - using the charge wire cleaner won't hurt
@occus, I believe they count drive counts so drum end life(change drum) message will pop up depending on usage - pre or post 50k prints.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
Aah, now I see it. It has nothing to do with drum life message it's to clear drum charge wire. Teach them how to do it and describe that it's normal and should do it when changing toner or when machine asking.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
Likes: 
Reply With Quote
Bookmarks