If cushion is OK. Check the spring under idc sensor cover.
If cushion is OK. Check the spring under idc sensor cover.
So two things that works against it. The plastic shaft on the separation roller wearing down the thinnest of layers and causing friction, grease is working until i can get it replaced. Then the restive registration sensor that is explained by the bulletin to be out of position causing the paper to stop for registration before its past the middle of the roller. Fixed that by sticking another 2mm of padding on top of the perfectly good existing padding.
Arrg its one of those fixes i just can't trust. Well its working for now.
Now just the DF issues where the paper does not get ejected completely.
Last edited by allan; 05-11-2022 at 04:16 PM.
Whatever
For the DF not ejecting the paper I found that there are 2 metal cam plates that separates the exit driven and driving rollers so that the paper can be removed from the platen side.
The metal plate cams are connected between the exit driven rollers and the flap to remove jams from the bottom. They get bent and worn ever so slightly.
Filed the worn areas and bent them back to shape and seem to be all ok now.
Whatever
Definitely going to keep my hands of those machines and blacklist them for sale. The amount of issues with those machines i read on here make my guts say something similar to f-off
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
Bookmarks