Results 1 to 7 of 7
  1. #1
    Junior Member
    Join Date
    Apr 2021
    Location
    Arlington
    Posts
    5
    Rep Power
    0

    Exclamation C454e paper exiting onto the conveyance

    I have a C454e that is having an issue where paper occasionally exits on top of the conveyance/transport section. The machine is recognizing that a FS-534 is in place with the proper conveyance section, and does not display a jam after paper exits on top of the conveyance. Sometimes it deposits in the finisher tray as it's supposed to, and sometimes it exits as if there's no finisher at all. This seems to only happen while printing, and simplexing vs duplexing has made no difference. I thought this could potentially be an exit gate issue, but it doesn't make sense to me why the machine doesn't throw a jam code. Has anybody experienced this issue before?

  2. #2
    Master Of The Obvious 10,000+ Posts
    C454e paper exiting onto the conveyance

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    20,730
    Rep Power
    412

    Re: C454e paper exiting onto the conveyance

    Perhaps you've got a print driver incorrectly configured (doesn't show the bridge & finisher)? =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    Field Supervisor 500+ Posts B0265's Avatar
    Join Date
    Jan 2007
    Posts
    642
    Rep Power
    41

    Re: C454e paper exiting onto the conveyance

    Check if someone have changed the Output Tray in the "Finish" tab of the printer driver.

  4. #4
    Service Manager 1,000+ Posts Gift's Avatar
    Join Date
    Mar 2011
    Location
    Gothenburg
    Posts
    1,627
    Rep Power
    53

    Re: C454e paper exiting onto the conveyance

    Quote Originally Posted by ArrowGB View Post
    I have a C454e that is having an issue where paper occasionally exits on top of the conveyance/transport section. The machine is recognizing that a FS-534 is in place with the proper conveyance section, and does not display a jam after paper exits on top of the conveyance. Sometimes it deposits in the finisher tray as it's supposed to, and sometimes it exits as if there's no finisher at all. This seems to only happen while printing, and simplexing vs duplexing has made no difference. I thought this could potentially be an exit gate issue, but it doesn't make sense to me why the machine doesn't throw a jam code. Has anybody experienced this issue before?
    No, that's really. Is there one or more paper tray(s) configured with wicked paper type settings? It could be triggered with the print job, too. Try and figure out if it's only happen with certain print jobs or from a certain client, then check if there are "proper" drivers with "proper" settings used. If you're lazy you can cross check with your laptop, prove it's OK and let the admin handle his job^^

  5. #5
    Service Manager 5,000+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    5,441
    Rep Power
    234

    Re: C454e paper exiting onto the conveyance

    Quote Originally Posted by ArrowGB View Post
    I have a C454e that is having an issue where paper occasionally exits on top of the conveyance/transport section. The machine is recognizing that a FS-534 is in place with the proper conveyance section, and does not display a jam after paper exits on top of the conveyance. Sometimes it deposits in the finisher tray as it's supposed to, and sometimes it exits as if there's no finisher at all. This seems to only happen while printing, and simplexing vs duplexing has made no difference. I thought this could potentially be an exit gate issue, but it doesn't make sense to me why the machine doesn't throw a jam code. Has anybody experienced this issue before?
    Check that this old lady is setup to show jam code, should be in system 2 if I remember correctly.
    Next is to put gate switch solenoid plate mode on place.
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

  6. #6
    Aging Tech 5,000+ Posts
    C454e paper exiting onto the conveyance

    copier addict's Avatar
    Join Date
    Jul 2013
    Location
    Diamond
    Posts
    7,713
    Rep Power
    215

    Re: C454e paper exiting onto the conveyance

    Quote Originally Posted by ArrowGB View Post
    I have a C454e that is having an issue where paper occasionally exits on top of the conveyance/transport section. The machine is recognizing that a FS-534 is in place with the proper conveyance section, and does not display a jam after paper exits on top of the conveyance. Sometimes it deposits in the finisher tray as it's supposed to, and sometimes it exits as if there's no finisher at all. This seems to only happen while printing, and simplexing vs duplexing has made no difference. I thought this could potentially be an exit gate issue, but it doesn't make sense to me why the machine doesn't throw a jam code. Has anybody experienced this issue before?

    The top of the transport section is a legitimate exit and can be setup in either user mode or admin mode under "output settings" to receive documents.

  7. #7
    Senior Tech 100+ Posts
    C454e paper exiting onto the conveyance


    Join Date
    Apr 2021
    Location
    Lake Tahoe, California
    Posts
    127
    Rep Power
    6

    Re: C454e paper exiting onto the conveyance

    Quote Originally Posted by copier addict View Post
    The top of the transport section is a legitimate exit and can be setup in either user mode or admin mode under "output settings" to receive documents.
    Believe its specifically Output Tray 3. Didn't learn this until somewhat recently and brought on some headscratching. Our remote IT accidentally configured a single driver to output there when they were testing Input Tray 3.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here